A Vance company - serving Carrollton, TX

Ghost Controls Keypad & Intercom Repair Nationwide

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Keypad & Intercom Repair: The Carrollton Owner’s Guide

Ghost Controls keypad and intercom repair in Carrollton typically runs between $185 and $410 installed, depending on whether we’re replacing the keypad face, the control board, or the full wireless intercom module. We stock Ghost Controls-compatible keypads and intercom boards on our trucks, so most calls in Carrollton are done same-day. The usual discovery goes like this: the keypad works at the house but not at the street, the intercom rings once and goes dead, or the gate opens fine from the remote but the keypad has gone completely dark. If you’ve been standing at your own gate punching a code that used to work, you already know which one you have.

Technician installing an electronic gate access control keypad on a pillar nationwide

Call (817) 778-4585

Key Takeaways

  • Most Ghost Controls keypad failures in Carrollton are water intrusion or degraded wiring, not a dead motor.
  • We carry OEM Ghost Controls keypads and intercom modules, plus quality aftermarket options when they make sense.
  • Your price is written down and handed to you before we touch a screwdriver. No surprises.
  • Same-day repair is available for keypad and intercom calls in Carrollton, because we stock the parts.

Which Ghost Controls Models This Applies To

Ghost Controls builds keypads and intercoms across two main lines: the standard residential series (AXP, DTP, and the newer WKP wireless keypad) and the heavy-duty Solar series used on larger gates. The keypad itself is usually a weatherproof membrane unit wired back to the control board with a 3-wire or 4-wire harness, depending on whether it’s a standalone keypad or a keypad/intercom combo. If you can read the model label on the back of the keypad housing, look for a WKP, AXPK, or DTKP prefix. That’s the part number we need to match.

One compatibility gotcha worth knowing: Ghost Controls changed their keypad connector pinout around 2019, so a keypad sold for a 2018 board will not plug into a 2021 board without an adapter harness. We keep both styles on the truck because this is a common Carrollton situation. On the OEM versus aftermarket question, we install Ghost Controls OEM parts when we can get them same-day, which is most of the time. For certain discontinued keypad models, we use an aftermarket equivalent that matches the exact voltage and wiring layout. We’ll tell you which one we’re using and why, and the part number goes on your written work order.

Signs Your Ghost Controls Keypad & Intercom Repair Is Failing

Professional repairing a cracked masonry gate post cap with industrial filler
Signs Your Ghost Controls Keypad & Intercom Repair Is Failing
  • Keypad lights up but won’t accept your code. This usually means the membrane contacts under the buttons are worn or moisture has seeped in and shorted a trace. We see this on Carrollton homes with west-facing gates where the afternoon sun cooks the keypad face.
  • Keypad works sometimes, fails when it rains. Water is getting into the housing through a cracked gasket or a screw hole that was never sealed. Ghost Controls keypads are rated for outdoor use, but Texas downpours find every weak seam.
  • Intercom rings but you hear static or nothing. The intercom module is picking up corrosion on the speaker terminals, or the wiring between the keypad and the control board has degraded. This is a repair we can do on-site without replacing the whole unit.
  • Gate opens with the remote but not the keypad. The keypad’s relay output has failed, or the control board isn’t receiving the keypad’s signal at all. We trace it with a meter, not guesses.
  • Keypad display is flickering or half-dark. The LCD or LED backlight is dying, or the power feed from the control board is dropping voltage. It’s usually a quick replacement, not a full rewire.
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

Here’s what Ghost Controls keypad and intercom repair costs in Carrollton, based on the calls we run every week:

  • Keypad face or membrane replacement: $185-$260 installed
  • Full keypad unit (OEM Ghost Controls): $240-$340 installed
  • Intercom module replacement (keypad/intercom combo): $310-$410 installed
  • Wiring repair or connector replacement: $95-$160 added to the part cost when needed

The range depends on which Ghost Controls model you have, whether the wiring is intact, and whether we’re doing one part or two. Every quote includes the part, the labor, and the written record of what was installed. Under The Haven Standard Clause 1, you get the price in writing before any work starts. No estimate after the fact, no invoice that looks different from what you were told. And the 365-Day Done Right Promise covers every keypad and intercom repair we complete: if it’s not right within a year, we make it right at no charge.

DIY or Call Us?

Technician using an angle grinder to repair a metal sliding gate
DIY or Call Us?

What you can safely do: check the keypad for visible cracks or moisture, make sure the wire connections at the keypad aren’t obviously loose, and test whether the remote still opens the gate. That tells you the gate motor and board are fine, which narrows the problem to the keypad or intercom itself. What you shouldn’t do: open a Ghost Controls control board and start probing with a multimeter unless you know what you’re doing. The board carries low voltage for the keypad but sits next to the gate motor’s high-current circuit, and one wrong probe can fry the board completely, turning a $200 keypad repair into a $500 board replacement.

If the keypad is dead, the intercom is buzzing, or the gate stopped responding to the code, call us at (817) 778-4585. We’ll name what we found, name what it costs, and put it in writing before we start. That’s how we’ve handled 22,000+ gate repairs since 2014, and it’s how we handle every Carrollton call.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Call Vance Gate Repair Carrollton

Two professional workers installing a heavy black metal security gate
Call Vance Gate Repair Carrollton

If your Ghost Controls keypad or intercom is down, call (817) 778-4585. A live person answers, any hour, any day. Adrian Vance and our technicians have been running keypad and intercom repair calls in Carrollton for years, including regular work out near the Arbor Hills Nature Preserve corridor where the older swing-gate setups are showing their age. We’ll name what we found, name what it costs, and name what we left behind, in writing, before we leave your property. That’s the only way we work.

Written by Adrian Vance, Owner, Vance Gate Repair Carrollton at Vance Gate Repair Carrollton, serving Carrollton and nearby areas.

Need Gate Repair help in Carrollton? Licensed & insured · 1-hour response · free estimates
Call (817) 778-4585
Local Service Coverage

Request a Free Estimate in Carrollton

Tell us what you need - Vance Gate Repair Carrollton responds fast. No obligation.

By requesting your free estimate, you accept our Privacy Policy and consent to receive communications through phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch