Linear Gate Repair Nationwide

Linear Gate Repair in Carrollton: What to Know First

Linear gate repair in Carrollton typically costs between $185 and $650 depending on what failed, with most control board and limit switch work landing under $400. We are an independent Linear service provider, not a factory-authorized shop, and we carry both OEM Linear parts and proven aftermarket alternatives so you are not stuck waiting on a distributor. Most Linear gate repairs in Carrollton are completed the same day we diagnose them. If you own a Linear gate that will not open, will not close, or is stopped mid-travel, call (817) 778-4585 and we will send a technician who has worked on these exact boards and arms before.

Call (817) 778-4585

This page is written for Carrollton homeowners with a Linear operator on a driveway gate, a Linear access keypad at the curb, or a Linear control board in the garage that needs real answers, not a sales pitch for a new gate. Adrian Vance and the crew have been repairing Linear equipment across Carrollton for years, including plenty of calls out near the Arbor Hills Nature Preserve corridor where older swing-gate systems are showing their age. Here is what actually fails, what it costs, and what we leave behind when the job is done.

How Linear Products Fail - and How We Fix Them

• Linear LDO series swing-gate operators: limit switch drift. The LDO50 and LDO33 use mechanical limit cams that wear over time, especially in Carrollton’s heat-and-rain cycle. The gate stops short of the closed position or shudders at the end of travel. We reset the limit assembly, photograph the new position, and if the cam teeth are stripped we replace the limit switch with an OEM Linear part so the travel settings stay put.
• Linear APeX series boards: relay chatter on the close cycle. The APeX control board is generally reliable, but we see the close relay fail intermittently on units installed before 2016. The symptom is a gate that opens fine and then sits there, or closes halfway and reverses for no visible reason. We test the relay under load, replace the board or the relay itself depending on the revision, and document the board number and date code in your photo log.
• Linear M3 and M3S slide operators: gearbox oil weep. Carrollton’s summer heat thins the gearbox lubricant on Linear slide operators, and we routinely find oil staining on the mounting pad. It looks alarming, but on M3 units it is usually a seal, not the gearbox. We replace the seal, top off the lubricant to Linear spec, and note the fill level on the record so the next service call does not replace a working gearbox.
• Linear photo-eye misalignment (all models). A photo-eye, the infrared beam that stops the gate if something crosses the path, drifts out of alignment on Carrollton posts that shift with soil movement. The gate will not close, or it closes and immediately reverses. We realign the beam, check the wiring for corrosion at the connector, and set the sensitivity so the gate does not falsing trip in direct sun.
• Linear mega-code receivers and remotes: programming loss after power surge. North Texas thunderstorms produce power surges that wipe the learned codes on Linear mega-code receivers. The gate ignores every remote and only works from the keypad. We reprogram the receiver, install a surge protector on the low-voltage side if the panel lacks one, and write the dip switch positions or learned-code count into your record.

Our Linear Gate Repair Process

1. 1
   You call, a person answers. At (817) 778-4585, a live person picks up 24/7. No voicemail loop, no callback queue. We collect the symptom, the Linear model number if you can read it off the label, and a service window that works.
2. 2
   A named technician arrives on time. Before the tech rolls up, you get a name and a photo. When they arrive, they check the operator’s travel, the limit settings, the photo-eye alignment, and the control board wiring using a multimeter and current draw readings, not guesswork.
3. 3
   Written price before any tool is lifted. This is Haven Standard Clause 1. The flat price goes on paper and into your hand before work starts. It covers the part and the labor, quoted as one number.
4. 4
   The repair is executed and documented. OEM Linear parts where the repair touches the control board or safety circuit. For brackets, standoffs, and wear items, we use quality aftermarket parts when they match or beat OEM spec and won’t affect a manufacturer warranty. Every adjustment gets photographed.
5. 5
   Cycle test, obstruction test, and fine-tune. We run the gate through open and close cycles, trip the obstruction circuit, and set the speed and force settings to Linear’s published tolerances. The gate leaves our hands working under load, not just on the workbench.
6. 6
   Photo log and written record left with you. Before we leave, you get a documented photo record of what we found, what we adjusted, what we replaced, and the part numbers installed. Per Haven Standard Clause 4, this is standard on every visit, no charge.

Before

After

What Linear Gate Repair Costs in Carrollton

Most Linear gate repairs in Carrollton fall into a few predictable price bands. Photo-eye realignment and limit switch reset runs $185 to $245, including the adjustment and the photo record. A replacement Linear limit switch assembly is $260 to $340 installed. Linear control board replacement, depending on whether it is an APeX or an older mega-code board, runs $380 to $650 with an OEM board and full reprogramming. Gearbox seal replacement on an M3 slide operator is $310 to $420.

The price is set in writing before we start, and it does not change unless you approve additional work. That is the point of Clause 1. If you have a written estimate from another Carrollton gate company, bring it and we will review it at no charge. Call (817) 778-4585 for a free estimate on your Linear gate repair, with the number delivered before any tool comes off the truck.

Why Carrollton Homeowners Call Vance Gate Repair Carrollton for Linear Work

Most Carrollton gate companies either push a full gate replacement the moment they see a Linear board they do not stock, or they give a verbal “estimate” that changes when the invoice arrives. We take a different position. Name what you found, name what it costs, name what you left behind. That is the entire logic, and it applies to every Linear job we run in Carrollton.

Adrian Vance started working access-control systems in 2014, and the commercial habit of photographing every board, every wire, and every limit switch setting carried over into residential gates. We service Linear alongside LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so we do not steer you toward a motor swap when the problem is a $40 limit cam. Every repair, panel tweak, and safety adjustment rides on the 365-Day Done Right Promise: if it is not right within a year, we make it right, no fee and no argument.

FAQs