Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Installation in Colleyville, TX: Written Pricing, Documented Work, No Guesswork
Gate installation in Colleyville usually runs between $2,800 and $11,000 for a complete driveway gate system, depending on whether you’re replacing an existing gate and operator or starting from scratch with new posts and a full automation package. Most single swing gates with a new operator land in the $3,500-$6,500 range, while custom double gates on brick pilasters with ornamental iron can exceed $12,000. We quote a written price before any work starts and we document every installation with photos, so you know exactly what you paid for. Call (817) 778-4585 for a free estimate on your Colleyville property.
Key takeaways:
- Typical Gate Installation in Colleyville runs $2,800-$11,000 for most driveway systems, with custom double gates starting around $6,000.
- Colleyville’s expansive clay soil heaves seasonally, which makes post footing depth and alignment the single most important variable in a lasting install.
- We service all nine major operator brands, so you don’t have to replace a working motor just because it’s old.
- Every job leaves you with a written scope, a written price, and a photo record under The Haven Standard.
Fast, Reliable Gate Installation Across Colleyville
Colleyville isn’t a market where you can hang a stock gate off a big-box rack and walk away. The homes off Pleasant Run Road, along Glade Road, and through the estate subdivisions south of Highway 26 are custom builds with non-standard setbacks, brick or stone pilasters, and ornamental iron work that was fabricated on-site decades ago. When we install a gate here, we’re working around that reality, not pretending every driveway is the same. Our crews respond to Colleyville from the Dallas-Fort Worth metro office, and we carry the steel, operators, and hardware needed to match existing ironwork rather than forcing a replacement panel that looks wrong against a custom fence. Call (817) 778-4585 and we’ll get someone out to measure, quote, and photograph the site before you commit to anything.
Why Colleyville Homeowners Choose Vance Gate Repair for Gate Installation
Colleyville has one of the highest per-capita concentrations of private automated ornamental iron driveway gates in the DFW Metroplex. That means we’ve seen more failure patterns on this specific housing stock than most companies see in a decade elsewhere. The custom estates built between the mid-1980s and mid-2000s are now hitting a compounding problem: aging control boards, weld joints corroding from irrigation overspray, and posts heaved out of plumb by Blackland Prairie clay. Homeowners here expect a company that understands those failure modes before they ever show up.
Started in 2014 by Adrian Vance, our team came up through commercial access control work, where every job required wiring diagrams, photographed proof, and written documentation before the invoice. We brought that same habit to residential gates in Colleyville. Under The Haven Standard, every installation quote is written down and handed over before work begins. Every visit ends with a photo log: what we found, what we set, what we installed. No future technician has to guess what happened on your gate. And if something isn’t right within 365 days, we make it right at no charge, no argument.
A live person answers our phone 24/7. No voicemail loop, no callback queue. Call (817) 778-4585 at 2 a.m. because your gate is stuck open and you’ll talk to a person who can dispatch a crew to Colleyville.
BeforeAfterOur Gate Installation Services in Colleyville
Driveway Gate Installation
Most driveway gates we install in Colleyville are replacement projects on existing custom iron. The original gate was fabricated for that specific opening, often with non-standard panel widths and heavy-gauge pickets, so we match the existing look rather than swapping in a generic panel. We handle single and double driveway gates, post replacement, hinge upgrades, and full automation integration. If your current gate still has good bones but the operator is dead, we can often reuse the iron and install a new motor, saving you thousands.
Swing Gate Installation
Swing gates are the dominant style in Colleyville’s estate neighborhoods, and they’re also the style most affected by the area’s expansive clay. When Blackland Prairie soil cycles through drought and rain, the ground moves enough to push posts out of plumb and bind the gate leaves. A proper swing gate installation here means digging footings below the active clay zone, usually 3 to 4 feet down, and setting posts with enough mass to resist seasonal movement. We also check the sprinkler layout before we pour, because irrigating a post twice a day is a slow-motion demolition of your footing.
Double Gate Installation
Double gates on Colleyville estates are rarely a simple mirror-pair. Often each leaf has a different width because of driveway geometry, landscaping, or how the original fabricator worked around a slope. We measure both leaves independently, weld or source matched components, and set operators that are sized for the combined weight. A 22-foot double swing gate with ornamental iron can weigh well over 1,200 pounds, and underpowered operators fail prematurely. We calculate the load and match the operator to it, not the other way around.
Pedestrian Gate Installation
Pedestrian gates in Colleyville are often built into the same fence line as the driveway gate, sharing a pilaster or a brick column. We install and automate pedestrian gates for side entries, back yard access, and pool enclosures, with the same documentation standard we apply to the main driveway. If you want a keypad, intercom, or remote release on a pedestrian gate, we can wire it into your existing system.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service and Install in Colleyville
We work on whatever motor is already on the property. That includes LiftMaster, DoorKing, Elite, Viking, FAAC, BFT, Linear, Ghost Controls, and Mighty Mule. Colleyville’s gate stock skews toward higher-end operators because the original builders spec’d them, and many of those units are now 15 to 25 years old. When a Viking or DoorKing from 2003 fails, the control board is often obsolete, and the decision is whether to retrofit with a modern equivalent or install a new LiftMaster or Elite operator matched to the gate’s weight. We’ll give you both options with written pricing, and we’ll explain honestly which one makes more sense for your gate and your budget.
Common Gate Installation Problems We See in Colleyville Homes
- Hinge post rot and gate sag from irrigation overspray. Colleyville’s estate lots often have sprinkler zones that run right up against the gate posts. A sprinkler head throwing water on a steel post twice a day will eventually get into the footing, corrode the post base, and sag the gate leaf. We see this more often than rain-related corrosion.
- Expansive clay heave pushing posts out of plumb. Blackland Prairie soil shrinks and swells dramatically. After a wet spring, posts that were dead-level in October can be an inch or two out of alignment, which binds the gate and overloads the operator. The fix starts with deeper footings, not just re-shimming the hinges.
- UV-baked nylon gear sets in south-facing operators. A gate operator mounted on a south or west facing entry with no overhead shade sits in direct Texas sun all summer. The nylon gears inside degrade faster, and thermal shutdowns become regular once daytime highs exceed 100°F. A shade cover or a different operator placement can add years to its life.
- Obsolete control boards on legacy operators. Many of Colleyville’s original gate installs used Viking, Elite, or DoorKing boards that are no longer manufactured. When those boards fail, repair means either sourcing a refurbished unit or retrofitting a modern control system that talks to the same motor. We’ll tell you which path makes sense before you spend a dollar.
Pricing for Gate Installation in Colleyville, TX
A complete new driveway gate installation in Colleyville, including the gate panel, posts, operator, and safety equipment, typically runs between $4,500 and $11,000. Replacing just the operator on an existing swing gate usually falls between $1,800 and $3,800 depending on the brand and whether the arm bracket is intact. Matching a custom ornamental iron panel for a double gate can run $3,000 to $7,500 for fabrication and hanging, because the material is heavy-gauge and the widths are non-standard. If you need new posts set below the clay line, budget an additional $800 to $1,800 per post for dig, pier, concrete, and finish work. Every quote is written and handed to you before work starts. Call (817) 778-4585 for an exact number on your specific gate.
How Colleyville’s Soil and Irrigation Actually Affect Gate Installation
Here’s something most gate companies won’t tell you: the biggest threat to a new gate install in Colleyville isn’t the Texas heat or the wind. It’s the sprinkler system you already have. Estate-grade irrigation on half-acre and two-acre lots commonly has zones that run right up against gate posts and operator housings. Six days a week through a Texas summer, that water soaks the post base, works its way into the concrete, and accelerates corrosion on the post and the hinge welds. We’ve replaced posts on gates where the iron panel was still structurally perfect but the post base looked like it had been sitting in saltwater for a decade. Before we install, we look at the sprinkler map. If a head is throwing water on the post, we’ll tell you. Moving a sprinkler head costs a lot less than replacing a post in three years.
Then there’s the clay. Colleyville sits on North Texas Blackland Prairie expansive clay. During drought, the soil shrinks and pulls away from footings. After heavy spring rain, it swells and pushes up. This cycle repeats every year, and it works on gate posts like a slow jack. Shallow footings, the kind that were common on 1990s installs, will heave noticeably within a decade. That’s why we pour footings 3 to 4 feet deep, below the active clay zone, and why we check plumb on every post we set, photographing the readings before and after. On a job off Pleasant Run Road, we replaced a 22-foot double swing gate with a vintage Viking operator whose control board had corroded beyond repair, because a sprinkler head had been soaking the hinge post twice a day. We poured new 4-foot footings, hung a matched custom iron leaf with fresh weld joints, and installed a new LiftMaster operator with safety photocells. The gate now swings plumb through every drought-and-rain cycle. That’s the standard we bring to every Colleyville install.
Should You Retrofit or Replace Your Old Colleyville Gate?
This is the question we answer most often for Colleyville homeowners with gates built between 1985 and 2005. The iron itself is usually excellent. Custom-fabricated ornamental steel from that era is often thicker and better-welded than what’s sold today. The problem is everything attached to it: the operator, the control board, the hinges, and sometimes the posts. If your gate panel is straight, the welds are sound, and the hinges aren’t pitted through, retrofitting a new operator and new controls is almost always cheaper than replacing the whole assembly, usually $1,800 to $3,800 versus $6,000 or more for a full new gate. But if the post footings have heaved, the hinges are corroded from irrigation, or the gate has sagged past the point of shimming, replacing just the operator means you’ll be back in a year. In that case, a full installation with new posts and matched iron is the cheaper long-term fix. We’ll show you the condition of every component with photos and give you a written price for both paths. You decide with evidence, not guesswork.
We Also Serve Cities Near Colleyville
Our crews cover Colleyville and the surrounding Tarrant County communities, including Bedford, Euless, Southlake, and Grapevine. If you’re in a neighboring city and need gate installation, the same written pricing and photo documentation standard applies. Call (817) 778-4585 and we’ll schedule a site visit.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Colleyville
That’s the Blackland Prairie clay expanding after the spring rains. The soil swells and pushes up against the post footings, moving the posts slightly out of plumb. When both posts tilt even half a degree toward each other, the gate leaves bind at the closing edge and the operator overloads. The permanent fix is setting the posts below the active clay line, typically 3 to 4 feet deep, so the seasonal movement stops affecting the alignment. Call (817) 778-4585 for a site check on your specific gate.
Yes, in most cases. Colleyville’s custom ornamental iron from the 1980s through 2000s is usually in better condition than the operator attached to it. If the gate panel is straight, the welds are intact, and the hinges aren’t pitted through, we can install a new operator and control system while reusing your existing iron. You save the cost of fabrication and get a modern operator with safety features and warranty. We’ll document the condition of your existing gate with photos before we recommend either path.
The first step is identifying which sprinkler zones are throwing water on the gate posts or operator housing. Walk the zone while it runs and look for heads within a few feet of the post. Moving the head a few feet or adjusting the spray pattern usually solves it. If a head can’t be moved, we can install a waterproof boot or shield around the post base and operator. The important thing is to stop the water before it soaks into the footing. Call (817) 778-4585 and we’ll assess your sprinkler layout during the site visit.
Under current UL 325 safety standards, which took effect in the early 2000s, automated swing gates in residential settings are required to have a monitored entrapment protection device, typically a set of photocells, installed. Gates installed before those standards existed are grandfathered in if the operator is original, but once you replace the operator or do significant work on the gate, the new equipment must meet current standards. We install safety photocells on every new operator installation in Colleyville, and we’ll explain what your specific gate needs during the estimate.
Seven to ten years, sometimes less if the operator is mounted on a south or west facing entry with no overhead shade and the nylon gear sets are cooking in direct Texas sun every summer. UV degradation and thermal shutdowns start to show up earlier on unshaded installations. A shade cover, better placement, or an operator rated for direct-sun exposure can extend that to 12 years or more. We’ll factor your gate’s sun exposure into any new operator recommendation we make. Call (817) 778-4585 for a written quote on your specific setup.
Get a Written Quote for Gate Installation in Colleyville
We serve the estate neighborhoods of Colleyville, from the customs off Glade Road to the newer builds south of Highway 26 through Bedford and Southlake. If you need a new gate, a retrofit on an old one, or just a straight answer on what’s wrong, call (817) 778-4585 for a free estimate. A live person answers, and we’ll come out, measure, photograph, and hand you a written price before any tool touches your property.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Colleyville and the DFW metro since 2014.