Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Plano
Gate installation in Plano runs $2,800 to $9,500 for a new automated driveway gate, depending on the gate style, operator, and whether we’re working with existing posts or setting new ones. Most Plano installs take one to two days once materials arrive, and we handle the full scope: gate, operator, safety sensors, power run, and the written documentation.
Vance Gate Repair Carrollton works in Plano neighborhoods every week. We know the west-side gated communities off Legacy Drive and Willow Bend, and we know the east Plano subdivisions where fences and gates date back to the 1980s. Our crews dispatch from our Dallas-Fort Worth office and reach Plano quickly. If you’re planning a Gate Installation project, call (817) 778-4585 and you’ll get a live person, not a voicemail loop.
Every Plano job follows the Haven Standard: a written price handed to you before any tool touches the ground, a photographed record of what was installed and how it was set, and a 365-Day Done Right Promise on the completed work. That’s been our operating rule since Adrian Vance started the company in 2014.
Why Vance Gate Repair Carrollton Is Plano’s Preferred Gate Installation Company
Plano homeowners call us because we handle the compliance layer most gate companies skip. A high percentage of west Plano’s gated homes sit inside HOAs with architectural review requirements covering gate material, finish, and style. We’ve worked through those reviews enough times to know what the committees look for, and we document every installation in a way that supports the approval record.
Our Plano customers consistently tell us the same thing: the written price before work starts is the reason they chose us. Not a verbal ballpark. Not a range that changes after the post hole is dug. A flat number on paper, with the scope listed, handed over before we begin. That’s Haven Standard Clause 1, and it’s non-negotiable on every Plano driveway gate we touch.
We also service more automation brands than most shops in the area. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If a Plano home already has a motor on the gate, we work with it, repair it, and adjust it before we ever steer toward replacement. That matters in a city where builder-grade operators are failing prematurely and homeowners are tired of being sold new units they may not need.
Our Gate Installation Services in Plano

Swing Gate Installation
Swing gates are the most common style in Plano, particularly the ornamental iron double-swing driveway gates found throughout west Plano’s master-planned communities. We install single and double swing gates with operators sized correctly for the leaf weight and the post condition. In Plano, we pay close attention to hinge post depth and footing design, because the Blackland clay heave cycle will find a shallow post within a season or two.
A swing gate install in Plano typically runs $3,200 to $8,500, including the gate frame, operator, safety sensors, and a documented photo record of the completed work.

Sliding Gate Installation
Sliding gates work well on Plano properties where the driveway slopes toward the house or where a swing gate would block a garage apron. We install cantilever and track-style slide gates, and we’re careful about track elevation in Plano’s clay soil. A track set flush to grade in wet spring soil can sit a half inch high by August when the clay shrinks back. We lay out slide gate tracks with that movement in mind.
Expect a sliding gate installation in Plano to land between $4,500 and $9,500 for a full automated system with entrapment protection and a hardwired power run.

Pedestrian Gate Installation
Pedestrian gates are a common add for Plano homes where the driveway gate is automated but the side yard gate still swings open by hand. We install walk gates with matching steel or wood construction, and we can fit them with electronic locks tied into the same access system as the driveway gate.
Pedestrian gate installation in Plano runs $1,800 to $4,000, depending on the width, the post condition, and whether we’re adding an electrified lock and keypad access.

Security Gate Installation
Security gates in Plano are less about keeping a vehicle out and more about controlling who approaches the front door. These are often taller steel gates with integrated intercom, camera, and keypad access, installed at the driveway entry or enclosing a courtyard. We build to the actual security need, not a catalog package, and we quote the gate, the operator, the access hardware, and the power run as separate line items so you see exactly what you’re paying for.
Security gate systems in Plano start around $6,000 and can reach $15,000 or more for full intercom and camera integration. The written quote lists every component and every hour of labor before we begin.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Plano
We work on nine automation brands, and in Plano we see a lot of LiftMaster, Elite, and DoorKing units on existing gates. If you have a working Elite slide operator that’s just been misbehaving, we’ll diagnose it and service it rather than push a replacement. Same with a LiftMaster swing arm that’s out of travel adjustment. We keep common repair parts on our trucks for Plano calls, which means less waiting on a second trip.
On new installations, we quote the operator brand that fits the gate’s weight, duty cycle, and placement, not whatever we happen to have in stock. The brand gets named in the written scope, and the part number goes into the photo log we leave with you.
Common Gate Installation Problems We See in Plano Homes

- Builder-grade operators failing on 20-to-30-year-old west Plano gates. The original post footings weren’t deep enough for the clay movement, so the gate shifts and the operator fights a misaligned rack. We see this on Legacy Drive, Willow Bend, and the neighborhoods branching off Preston Road.
- No power run stubbed to an east Plano manual gate. Homeowners in 1980s subdivisions often want automation added to a gate that was installed manual. The problem: no conduit, no power, no low-voltage lead for a loop detector. That means a full trench and pull, which changes the scope and the price.
- Post heave within a single season. A standard 3-foot footing in Plano’s clay can move enough to bind a swing gate by fall. We address this at installation with deeper footings or helical piers, especially on the heavy ornamental iron gates common in west Plano.
- Ice storm damage to tracks and photocells. January and February glaze coats slide tracks and safety beams, causing obstruction trips and overloads that get misread as motor failure. Plano homeowners call us thinking the operator is dead when the real issue is a quarter inch of ice on the track.
Pricing for Gate Installation in Plano, TX
Here’s what Plano homeowners should expect to pay, in writing:
| Gate Installation Scope | Typical Plano Price Range |
|---|---|
| Pedestrian gate, manual | $1,800 - $3,200 |
| Pedestrian gate with electric lock and keypad | $2,600 - $4,000 |
| Single swing driveway gate, automated | $3,200 - $6,500 |
| Double swing driveway gate, automated | $4,800 - $8,500 |
| Sliding gate, automated, with power run | $4,500 - $9,500 |
| Security gate with intercom and camera integration | $6,000 - $15,000+ |
What moves the number in Plano: post condition (rotting wood posts in east Plano add demolition and new steel post cost), whether HOA approval is still pending, how far the power run has to travel from the panel, and whether we’re adding a loop detector for vehicle exit. The price we quote is the price on the invoice. If we find something mid-job that changes the scope, we stop, show you, and get your written sign-off before continuing.
Call (817) 778-4585 for a free written estimate on any gate installation in Plano.
We Also Serve Cities Near Plano

Beyond Gate Installation in Plano, our crews cover Allen, Carrollton, Prosper, and Little Elm. If you’re in one of those communities and planning a gate install, the same Haven Standard applies: written price, photo documentation, and the 365-Day Done Right Promise on everything we complete.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Plano

In Plano, driveway gate post footings should go at least 36 to 48 inches deep, and heavier ornamental iron gates often need helical piers driven well below the clay’s active movement zone. The Blackland Prairie clay expands and contracts aggressively, and a standard 3-foot footing can heave enough to bind the gate within a single season. We set deeper footings or piers on every Plano driveway gate install because the cost of doing it again in two years is far worse than doing it right the first time. Call (817) 778-4585 and we’ll assess your soil and post condition in person.
Yes, but it usually means a full trench and power pull, not just mounting a motor. East Plano’s 1980s subdivisions often have gates installed manual with no conduit stubbed to the gate location. We’ll need to run underground conduit, pull the power and low-voltage lines, and install a loop detector or photocell entrapment protection to meet UL 325. We include that full scope in the written estimate before any digging begins. Call (817) 778-4585 for an exact quote on your property.
In most west Plano master-planned communities, yes, installing a driveway gate operator typically requires HOA architectural review, and many HOAs also govern gate material, finish, and style. The review can take two to six weeks depending on the association’s meeting schedule. We’ll help you understand what your specific HOA requires and document the installation in a way that supports your approval record. Call (817) 778-4585 and we’ll walk you through the process for your neighborhood.
In Plano, that almost always traces back to the post footing, not the gate itself. The clay soil shifts the post, the gate drops slightly out of square, and the latch side starts dragging. We recently installed a LiftMaster LA400 swing gate operator for a homeowner off Legacy Drive whose gate had been fitted with a builder-grade unit that couldn’t hold alignment through the winter clay heave. We set new hinge posts in helical piers, ran rigid conduit for the power and loop detector lead, and added a safety photocell across the driveway to meet UL 325. The gate has held alignment since. Call (817) 778-4585 if your gate is sagging and we’ll tell you in person what’s moving.
UL 325 requires entrapment protection on every automated gate, which means at least two independent safety systems: typically a pair of photo-eyes across the gate opening plus an inherent reversing mechanism in the operator itself. Slide gates and swing gates use different sensor placements, and the wiring needs to be documented. We include entrapment protection on every Plano installation and photograph the sensor positions in the final documentation. Call (817) 778-4585 for a full explanation of what your gate needs.
Get a Written Quote for Gate Installation in Plano
If you’re planning a new driveway gate, adding automation to an existing gate, or building a security gate at your Plano home, call (817) 778-4585. You’ll reach a live person, day or night. We’ll schedule a site visit, walk the property with you, and hand you a written price before any work begins. That’s the Haven Standard, and it applies to every gate we install in Plano.
Written by Adrian Vance, Owner at Vance Gate Repair Carrollton, serving Plano since 2014.





Before
After
Before
After