Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Carrollton?
Gate parts and welding repairs in Carrollton typically range between $175 and $550, depending on the severity of the structural damage and the specific components involved. Simple steel welding repairs on hinges or brackets usually fall on the lower end of that spectrum, while complex automation arm replacements or custom fabrication work for heavy-duty driveway gates can reach the higher end. We provide upfront, written pricing before any work begins, ensuring you know exactly what the cost will be before our technicians pick up a tool.
Gate Parts & Welding Cost Breakdown (2026)
Every gate system in Carrollton is unique, and pricing reflects the specific metal gauge, the motor brand, and the nature of the mechanical failure. The following estimates represent standard field rates for our service area.
| Service Item | Estimated Price Range |
|---|---|
| Minor Steel Welding (Hinge/Bracket Repair) | $175 - $325 |
| Gate Arm or Hinge Replacement (Parts & Labor) | $250 - $480 |
| Structural Reinforcement/Custom Welding | $350 - $650 |
| Electronic Sensor/Photo-Eye Adjustment & Wiring | $195 - $375 |
| Gate Motor Troubleshooting & Minor Part Swap | $225 - $450 |
These figures assume standard residential gate configurations. If we find that a gate has been struck by a vehicle or is suffering from severe rust-through on the main frame, we will document the full scope of the required welding work and provide a firm quote before proceeding. Under The Haven Standard (Clause 1), we never start a job without a written price in your hands.
What Affects Gate Parts & Welding Pricing in Carrollton
Several factors influence the final cost of your gate repair. Understanding these helps you anticipate what our technicians will look for when they arrive at your property.
- Metal Condition and Corrosion: In the humid Texas climate, rust can penetrate deep into steel tubing. Welding onto compromised, rusted-out metal requires extra prep time to grind down to clean steel, which increases the labor cost compared to a clean, structural repair.
- Gate Weight and Material: Heavy-duty wrought iron gates require different welding rods and more heat penetration than lighter, ornamental aluminum gates. The heavier the gate, the more reinforcement is needed at the hinge points to prevent future failure.
- Accessibility and Site Geometry: If your gate is located on a steep incline or has limited clearance for our mobile welding equipment, setup time increases. We factor this into our initial written estimate so there are no surprises.
- Brand-Specific Parts: We service nine major automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If a proprietary board or motor component needs replacement, the price of that specific part varies by the manufacturer’s current supply chain costs.
- Structural Damage vs. Mechanical Failure: A gate that won’t close because of a broken hinge requires welding; a gate that won’t close because of a misaligned limit switch requires adjustment. We diagnose the difference immediately and document it in your Gate Parts & Welding in Carrollton service record.
BeforeAfterHow to Save on Gate Parts & Welding
You can keep costs manageable by addressing small issues before they turn into complete system failures. A gate that drags on the pavement puts immense stress on the motor and the hinges, which eventually leads to a more expensive repair than simply adjusting a hinge pin today.
We recommend a visual inspection every few months. Look for loose bolts, exposed wiring, or scraping sounds when the gate moves. If you catch a loose bracket early, it is a quick weld. If you wait until the gate falls off the post, it becomes a structural repair project.
Under Clause 4 of The Haven Standard, we provide a documented photo record on every visit. This means you get a clear view of exactly what we found, what we adjusted, and what we installed. This record helps you track the health of your gate over time, preventing you from paying twice for the same underlying issue. If you have a written estimate from another company, bring it to us. We offer a free second opinion on any third-party quote to ensure you aren’t paying for unnecessary parts or inflated labor hours. Call (817) 778-4585 to schedule your assessment.
Step-by-Step: How We Handle a Gate Repair Visit
When you call Vance Gate Repair for a service visit, we follow a consistent process designed to protect your property and your investment.
- Arrival and Assessment: Our uniformed, background-checked technician arrives at your home. We do not start work until we have identified the root cause of the failure.
- Written Scope and Price (Haven Standard Clause 1): We present a written document detailing the problem, the required parts, and the exact price. You approve this before we open our tool bag.
- Execution and Documentation: We perform the repair, whether it involves welding structural steel or replacing a specific motor board. As per Clause 4, we photograph the work area before and after the repair.
- Testing: We cycle the gate through its full range of motion. We verify that the photo-eyes (the infrared beams that prevent the gate from closing on obstructions) are aligned and functioning correctly.
- Record Handover: Before we leave, you receive a copy of your service record, including the photo log and a summary of the parts installed. This document is yours to keep for future reference.
FAQs - Gate Parts & Welding Cost
How much does it cost to weld a broken gate hinge in Carrollton?
Standard hinge welding repairs in Carrollton typically cost between $175 and $325. This price covers the cost of grinding the area to clean steel, performing the structural weld, and applying a rust-preventative primer or paint to the repair site. Call (817) 778-4585 for an exact quote.
Can you fix my gate motor if it is a brand like Viking or DoorKing?
Yes. We service nine major automation brands, including Viking, DoorKing, LiftMaster, FAAC, BFT, Linear, Ghost Controls, Elite, and Mighty Mule. We don’t push for replacements; we specialize in repairing the equipment you already have installed.
Is it cheaper to repair or replace a gate motor?
In most cases, repairing the existing motor is more cost-effective, especially if the issue is a specific component like a control board, limit switch, or wiring harness. We will provide a transparent comparison between the cost of a repair versus a new installation once we inspect the unit. Call (817) 778-4585 to have us take a look.
Do you charge for estimates?
We provide transparent, upfront pricing before any work begins. If you have a written estimate from another local company, we will review it at no cost. Call (817) 778-4585 to discuss your gate needs.
What if the gate breaks again after you fix it?
Our work is backed by the 365-Day Done Right Promise. If the repair we performed fails within one year, we will come back and make it right at no additional charge. This is our commitment to quality on every gate we service in Carrollton.
Pricing reflects the Carrollton market as of 2026. Vance Gate Repair Carrollton offers free estimates and Gate Parts & Welding services - call (817) 778-4585. Written by Adrian Vance, Owner at Vance Gate Repair, serving Carrollton since 2014.
What Our Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.