Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Grapevine, TX
Gate access control is the repair call we make most often in Grapevine, and the airport corridor is why. Master-planned subdivisions built between the 1980s and 2000s run HOA-governed entry gates on their second or third operator, while commercial properties along SH-114 and SH-121 cycle automated gates hundreds of times a day under shuttle buses and delivery trucks. The result is a repair market split between residential driveway gates with aging hardware and high-cycle commercial systems that fail well before their rated lifespan. Call (817) 778-4585 and a live person answers.
Why Grapevine Homes Are Different
Grapevine sits on North Texas black clay, a soil that heaves with seasonal moisture and slowly shoves gate posts out of plumb. A swing gate that latched cleanly in March can bind at the latch by August, not because the operator failed but because the post moved a quarter inch. Summers that run past 100°F cook the lubricant inside gate operators and speed oxidation on ornamental iron that was never resealed. The Historic District near Main Street adds its own complication: pre-1960s homes with wrought iron and wood gate hardware that needs period-appropriate repair rather than modern replacement. And along the SH-114 hotel corridor, service-entrance sliding gates cycle far beyond standard residential duty ratings, which is why the same addresses call us back for gearbox and motor work every 12 to 18 months.
Our Main Grapevine Services
Most Grapevine calls fall into two buckets: the gate stopped working, or the homeowner wants a new one. These three Grapevine pages cover the details.
Gate Repair in Grapevine
A gate that won’t open, won’t close, or grinds through its travel is usually a fixable problem: a sensor out of alignment, a hinge worn past tolerance, a limit switch set wrong. In Grapevine, clay-soil movement adds a twist, because a post that shifted half an inch changes the entire geometry of the gate. We diagnose the specific failure, photograph it, and hand you a written price before any tool comes out. Read more on our Gate Repair in Grapevine page.
Gate Installation in Grapevine
New gate work in Grapevine means accounting for soil that moves and HOAs that govern material, height, and finish. We measure on site, recommend gate styles that fit the neighborhood’s aesthetic rules, and quote the full scope in writing: concrete, posts, gate fabrication, hardware, and operator. No verbal estimate, no surprise line items. Details are on the Gate Installation in Grapevine page.
Gate Motor & Opener in Grapevine
When the motor runs but the gate doesn’t move, or the opener hums and trips, the problem is usually the operator itself: a stripped gear, a blown capacitor, a control board that lost its programming. Grapevine’s heat accelerates lubricant breakdown in residential operators, and airport-adjacent commercial gates wear out duty cycles fast. We service nine brands and fix the operator you have. See Gate Motor & Opener in Grapevine for specifics.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Grapevine
Grapevine’s access control work splits along the same line as the rest of its gate market: residential keypads and intercoms in HOA subdivisions, and commercial card readers and phone entry on airport-adjacent properties. Black clay soil heaves posts and can misalign the photo-eye on a newly installed access system, while summer heat pushes keypad circuit boards past their comfort zone. This is the work our Gate Access Control team handles most often in Grapevine: diagnosing why access stopped, then making it work without replacing what still functions.
Keypad Entry
Signs you need it
The keypad accepts some codes but not others, dims in direct sun, or fails only after rain.
What it costs in Grapevine
Replacing a residential keypad in Grapevine typically runs $185 to $420, depending on whether it is a standalone unit or tied into a larger access system.
How we do it
We trace the wiring, test the keypad under load, replace the unit or the board, and reprogram codes, then photograph the finished connection points.
Video Intercom
Signs you need it
Audio works but video doesn’t, or the call button rings inside only intermittently.
What it costs in Grapevine
Installing a video intercom at a Grapevine driveway gate runs $900 to $2,000, with repairs to an existing unit ranging from $150 to $400.
How we do it
We check camera power, signal wiring, and the monitor connection, then replace the failed component and verify call quality at the gate and inside the house.
What Gate Access Control Costs in Grapevine
| Item | Typical range in Grapevine |
|---|---|
| Keypad replacement or repair | $185 - $420 |
| Video intercom installation | $900 - $2,000 |
| Card reader replacement | $350 - $650 |
Can you add a keypad to my existing Grapevine gate motor?
Yes, in most cases you can. A wired keypad ties directly into the operator’s control board terminals, and we can add one to nearly any residential gate motor in Grapevine. Call (817) 778-4585 for a written quote.
Why does my keypad stop working after heavy rain?
Grapevine’s clay soil shifts with moisture, and that movement can expose or stretch keypad wiring at the post base while water seeps into the housing. We seal the enclosure and secure the wiring to stop it recurring. Call for an assessment.
Gate Parts & Welding in Grapevine
Grapevine’s older subdivisions are full of ornamental iron gates installed 20 to 30 years ago, and the hardware is reaching the end of its service life. Hinges wear oblong, posts lean on shifted clay, and rails crack where rust has thinned the metal. Our Gate Parts & Welding work in Grapevine replaces those components and welds the gate back to structural soundness without replacing the whole assembly.
Hinge Replacement
Signs you need it
The gate drags at the latch side or scrapes the ground, and the hinge pin shows visible wear or play when you lift the gate.
What it costs in Grapevine
Replacing a worn gate hinge in Grapevine typically runs $75 to $250 per hinge, depending on gate weight and whether welding is required.
How we do it
We support the gate, cut or unbolt the old hinge, weld or bolt the new one in place, and adjust the gate so it swings true.
Post Replacement
Signs you need it
The gate post leans visibly, the gate binds at the top or bottom, or the post base shows rust through the paint.
What it costs in Grapevine
Concrete-set post replacement in Grapevine runs $350 to $900 per post, including digging out the old footing and resetting on compacted base.
How we do it
We brace the gate, remove the failed post, pour a new concrete footing sized for the soil, and reset the post plumb before rehanging the gate.
What Gate Parts & Welding Costs in Grapevine
| Item | Typical range in Grapevine |
|---|---|
| Hinge replacement | $75 - $250 per hinge |
| Post replacement | $350 - $900 per post |
| Custom welding repair | $250 - $400 per hour |
Can you weld my ornamental iron gate without replacing it?
Usually yes. If the gate’s structural frame is intact, we weld cracked rails, reinforce rust-thinned sections, and rehang it on new hardware. Call us for a written assessment in Grapevine.
How long does a welded repair last in Grapevine?
A properly welded and sealed repair on an iron gate lasts years, but the clay soil will still move the posts, so we build in a maintenance check. We hand you a photo record of every weld before we leave.
Brands We Service in Grapevine
We service Ghost Controls, DoorKing, and Mighty Mule operators in Grapevine, among the nine brands we carry parts for. Common boards, remotes, and photo-eyes for these brands stay stocked locally, so most residential repairs happen in a single visit. See our brands for the full list.
Pricing for Gate Repair in Grapevine, TX
| Service | Typical range in Grapevine |
|---|---|
| Gate repair service call | $65 - $95 |
| Full gate spring replacement | $45 - $130 per spring |
| Gearbox replacement | $250 - $400 |
| Power supply replacement | $110 - $270 |
| Limit switch replacement | $130 - $260 |
| Remote control replacement | $75 - $120 |
| Hinge replacement | $75 - $250 per hinge |
| Post replacement | $350 - $900 per post |
| Keypad replacement or repair | $185 - $420 |
| Custom welding repair | $250 - $400 per hour |
In Grapevine, the two biggest price drivers are soil movement and heat. A post that shifted on clay pulls the gate out of alignment and wears hinges faster, while summer heat accelerates gearbox and board failures. Whatever the job, the price is written and agreed before any work starts.
Neighborhoods We Serve in Grapevine
We work across every corner of Grapevine, from the Historic District near Main Street to the HOA subdivisions north of Highway 114 and the residential streets east of Lake Grapevine. Response time for most Grapevine calls is same-day or next-day, depending on when you call and the parts involved.
- Historic District
- Timberline Estates
- Meadowmere Park area
- Silver Lake Estates
- Park Lakes
Service Area - Cities Near Grapevine
We serve Grapevine and the surrounding metro, including Southlake, TX, Colleyville, TX, Euless, TX, and Coppell, TX. Same repair approach in every city: written price, documented record, live phone answer.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Grapevine
Most Grapevine gate repair calls are handled same-day or next-day. Emergency calls, like a gate stuck open or blocking a driveway, get priority. A live person answers the phone 24/7 at (817) 778-4585.
Repairs to an existing gate usually don’t need HOA approval in Grapevine, but replacements or finish changes often do. We can provide the written scope and material specs your HOA asks for before you submit anything.
Yes. For Historic District homes with pre-1960s wrought iron or wood gate hardware, we can weld matching repairs or source period-appropriate hardware rather than forcing a modern replacement. We document the match in photos before proceeding.
Call (817) 778-4585 for a free estimate on any gate repair in Grapevine. A live person answers, and the price you get is the price you pay, in writing, before the work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grapevine Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.