Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Dallas, TX
Gate access control problems in Dallas usually trace back to two local realities: the Blackland Prairie clay that shifts every gate post, and the 1980s-to-2000s housing stock whose original keypads and intercom wiring have outlived their design life. We replace failed keypad boards, re-terminate corroded wire runs, and rebuild access panels that the Texas heat has cooked inside their enclosures. Call (817) 778-4585 when a keypad goes dead or a gate stops reading a remote, and we will give you a written price before any work starts.
Why Dallas Homes Are Different
Dallas sits on expansive black clay that swells with spring rain and shrinks through summer, which means a gate post that was plumb three years ago may now lean enough to throw the latch out of alignment. In Lake Highlands and Buckner Terrace, we routinely find racked posts and binding hinges on houses built between 1985 and 2005, where ornamental iron gates were installed with concrete footings that were never deep enough for this soil. Further north in Preston Hollow and Highland Park, the problem shifts to weight: heavier custom swing panels put constant strain on older hinge barrels and operator arms. Then the climate works the electronics over. Consecutive 105-degree days degrade wiring insulation inside control boxes, and hard freezes like February 2021 crack hydraulic actuators and snap hinges that were already fatigued. Companies that do not work in Dallas regularly misdiagnose these jobs because they treat a soil problem as a hardware problem. The fix often starts at the post.
Our Main Dallas Services
The three calls our Dallas dispatchers hear most are these:
Gate Repair in Dallas
Most repair calls in Dallas are misalignment jobs with a mechanical root: a post has moved in the clay, a hinge barrel has elongated, or a wheel has worn flat against the track. We diagnose the whole gate path, not just the failed part, and you get a written price before we touch a bolt. Gate Repair in Dallas covers the full scope of what our technicians fix daily across the city.
Gate Installation in Dallas
New gate installations in Dallas succeed or fail on the footing. Our crews size post depths to this soil, not to a generic chart, and we set posts below the shrink-swell zone wherever lot access allows. Gate Installation in Dallas walks through what a properly engineered install looks like here, from first measure to final operator programming.
Gate Motor & Opener in Dallas
Dallas heat is the silent killer of gate operators. Circuit boards cook inside poorly ventilated enclosures, capacitor fatigue shows up in August, and January freezes test every limit switch. We service nine automation brands and diagnose before recommending replacement. Gate Motor & Opener in Dallas spells out the same-day repair scope for every operator we stock parts for.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Dallas
Gate access control in Dallas means keeping a system working through 105-degree summers, freeze-thaw cycles, and soil movement that tugs at buried conduit and entry loop wires. Most of our Dallas access jobs are repairs on homes built between 1985 and 2010 whose original telephone-entry or keypad systems have reached the end of their service life, or retrofits on Preston Hollow and Highland Park estates that need a modern video intercom without ripping up the driveway. Every visit under Gate Access Control leaves you with a photo record and a written summary of what we found and set.
Keypad Entry
Signs you need it
The keypad lights but the gate will not cycle, or some codes work while others do nothing.
What it costs in Dallas
Replacing a failed keypad or its controller board typically runs $260-$485, depending on whether the enclosure and wiring are reusable.
How we do it
We test voltage at the keypad, replace the failed component, reprogram all access codes, and photograph the finished panel and splice points.
Video Intercom
Signs you need it
The camera image is black, audio is one-way, or the master station will not release the gate relay.
What it costs in Dallas
Video intercom repair in Dallas ranges from $230 for a power-supply swap to $485 for a full master-station replacement, and complete new system installs typically run $1,800-$2,900 with two monitors.
How we do it
We trace the signal path from door camera to master station, replace or reconfigure the failed unit, and verify the gate relay opens on command.
What Gate Access Control Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Keypad or controller board replacement | $260-$485 |
| Video intercom repair | $230-$485 |
| Complete video intercom install | $1,800-$2,900 |
Can you replace just the keypad, or does the whole system need replacing?
Usually just the keypad or its controller board. We stock boards for DoorKing, Elite, and LiftMaster systems common in Dallas, and we will quote the exact part number before ordering.
Do you repair existing video intercoms or only install new ones?
We repair what is on the wall first. Many Dallas systems just need a power supply or a corroded wire connection replaced, not a whole new intercom.
Gate Parts & Welding in Dallas
Gate parts and welding in Dallas is usually about damage that starts underground, where Blackland Prairie clay has pushed a post out of plumb and transferred that stress into hinges, rails, and rollers. On Dallas’s older ornamental iron gates, we regularly replace hinge barrels that have ovaled from years of a settling gate, and weld cracks that open where the pickets meet the top rail after a season of soil movement. The full scope lives on our Gate Parts & Welding hub page.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, scrapes the ground, or bounces when it closes.
What it costs in Dallas
Hinge replacement runs $150-$320 per hinge depending on gate weight and how much of the post is still sound, and full gate realignment typically runs $200-$400 per gate.
How we do it
We lift the gate off its loading, inspect the post for cracks, weld or bolt new hinges in place, and photograph the final hang height and gap.
Post Replacement
Signs you need it
The post is visibly leaning in the clay, the gate will not latch, or concrete at the base has cracked and pulled away.
What it costs in Dallas
Post replacement in Dallas’s expansive soil runs $700-$1,200 per post when the old footing must be excavated and a deeper sonotube set, which is the standard fix in east Dallas.
How we do it
We cut the post free, dig out the old footing, set new concrete below the shrink-swell zone, and weld or bolt the original gate back to the new post with shims to plumb.
What Gate Parts & Welding Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Hinge replacement | $150-$320 per hinge |
| Gate realignment | $200-$400 per gate |
| Post replacement | $700-$1,200 per post |
Can you weld a crack in an iron gate without replacing the whole section?
Yes. Most cracks in Dallas iron gates are fatigue or stress cracks from soil movement, and a welded repair with a gusset plate is usually permanent if the post is addressed.
How long does a post replacement last in Dallas clay?
With a footing set below the shrink-swell zone, we expect decades of service. Shallow set posts often fail again within two or three rainy seasons.
Brands We Service in Dallas
Our Dallas trucks carry boards, remotes, keypads, and capacitors for DoorKing, Elite, Mighty Mule, and LiftMaster, which covers a large share of the operators installed across the city’s 1980s-to-2000s subdivisions. We stock the fastest-moving parts locally so most motor and access repairs go in one visit. Full details on our brands page.
Pricing for Gate Repair in Dallas, TX
| Service | Typical range in Dallas |
|---|---|
| Keypad or controller board replacement | $260-$485 |
| Video intercom repair | $230-$485 |
| Complete video intercom install | $1,800-$2,900 |
| Hinge replacement | $150-$320 per hinge |
| Gate realignment | $200-$400 per gate |
| Post replacement | $700-$1,200 per post |
Two things push prices up in Dallas: clay soil that has already moved a post, which adds excavation time to any hardware job, and estate-sized gates in Preston Hollow and Highland Park whose weight demands heavier hinge stock and more setup. Whatever the scope, the price is written and handed to you before any work begins.
Neighborhoods We Serve in Dallas
Our Dallas crews work across the city from one metro dispatch office, which means we can reach most neighborhoods the same day for repair work and same week for scheduled installations.
- Lake Highlands
- Buckner Terrace
- Preston Hollow
- Highland Park
- University Park
Service Area - Cities Near Dallas
Beyond Dallas, our crews cover the inner-ring cities where the same clay soil and 1980s-to-2000s housing stock create the same gate failures. We serve Irving, TX, Carrollton, TX, Coppell, TX, and Euless, TX with the same written-price policy and photo-documented visits.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Dallas
Same-day dispatch is available for most repairs across Dallas. Our technicians are already working these neighborhoods every day, and a live person answers the phone around the clock to schedule your visit.
It depends on your deed restrictions and whether the gate is a front-facing structure visible from the street. We provide a written scope and material list that most Dallas HOAs accept when prior approval is required.
Yes. We work on residential driveway gates and the light commercial gate systems common at small office parks and multi-tenant properties across Dallas, using the same documented, written-price process on every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dallas Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.