Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair in Carrollton, TX
Gate access control and gate parts repair in Carrollton mean working on equipment that was installed when these neighborhoods were first built, now hitting the end of its service life all at once. Most of the gates we open in Carrollton were hung in the 1980s and 1990s, and the operators attached to them are 30 to 40 years old. The Vertisol clay under Carrollton shifts with every drought and rain cycle, racking gate posts out of plumb and binding operators that were perfectly aligned a season ago. That combination, aging hardware and moving ground, is the Carrollton gate repair profile in one sentence. Call (817) 778-4585 and a live person answers, any hour.
Why Carrollton Homes Are Different
Carrollton’s residential build-out peaked between the 1970s and 1990s, which means hundreds of HOA-governed subdivisions now carry original ornamental iron driveway gates and swing operators that are aging out simultaneously. This is not a one-off repair environment; it is a wave. In neighborhoods like Castle Hills and other late-1980s master-planned communities, legacy Elite and older LiftMaster swing-gate operators are common, and many are no longer actively supported by the original manufacturers. A gate company that stocks those legacy parts gets the repeat HOA work; a company that only carries current catalog parts cannot finish the job on the first visit.
The soil is the second factor. Carrollton sits on expansive Vertisol clay, the same black gumbo that runs through much of Dallas-Fort Worth. It shrinks hard during summer droughts, when highs regularly top 105°F, and heaves after rain. Gate posts set without deep concrete footings, common in older subdivisions, lean and rack seasonally. An operator that was quiet in May can bind and fault by August not because the motor failed, but because the post moved a half inch and the limit switch is now reading travel that no longer exists. UV degradation from those same summers also shortens the life of wiring insulation and heat-cycles control boards faster than in cooler climates.
We document what we find. Before we leave any Carrollton job, the homeowner gets a written record of what was found, what was adjusted, and what was installed, with photos. The price was already on paper before we started.
Our Main Carrollton Services
Carrollton homeowners most often call Vance Gate Repair for two things: a gate that will not open or close reliably, and an operator or motor that has failed. Each has its own Carrollton page with local detail.
Gate Repair in Carrollton
Repair work in Carrollton is dominated by the age of the hardware and the soil movement under it. A swing gate that drags on the driveway or a slide gate that stops mid-travel is usually a post lean problem before it is a motor problem. We carry replacement hinges, rollers, and brackets suited to gates installed during the 1980s and 1990s buildout, and we run the full mechanical check before touching the operator settings. Gate Repair in Carrollton covers the repair side in detail.

Gate Installation in Carrollton
A new Carrollton gate install has to account for the clay from day one. Post footings need to go deep enough to resist seasonal heave, and the operator choice depends on whether the gate is swing or slide, iron or aluminum, and whether the HOA has a finish requirement. Carrollton HOAs are specific about appearance. Gate Installation in Carrollton walks through the full process and what to budget.

Gate Motor & Opener in Carrollton
When a 30-year-old operator dies, the decision is repair versus replace, and in Carrollton it often comes down to parts availability. Some legacy operators are still serviceable if you can source the control board or limit assembly. We service nine major brands, including Elite and older LiftMaster units common in Carrollton, and we write up the comparison honestly rather than steering toward a sale. Gate Motor & Opener in Carrollton covers motors, openers, and replacement options.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Carrollton

Gate access control in Carrollton is the layer between the street and the driveway: keypads, remotes, phone entry, card readers, and video intercoms. In Carrollton’s HOA-managed subdivisions, the original access hardware installed during the 1980s and 1990s buildout is now aging out, and the seasonal ground movement that racks gate posts also shifts the alignment between photo-eyes and the gate frame. That misalignment is one of the most common Carrollton access control failures we see, a beam that reads an obstruction because the post it is mounted to moved two inches out of plumb. We work on whatever access system is already on the property rather than pushing a full replacement. Our broader Gate Access Control page covers the full range of systems we service.
Keypad Entry
Signs you need it
The keypad accepts some codes intermittently, the key backlighting fails, or the membrane is cracked from years of Texas sun.
What it costs in Carrollton
Most keypad repairs and replacements in Carrollton run $150 to $400 depending on whether we are replacing the keypad head or just the wiring run.
How we do it
We trace the circuit from the keypad to the control board, identify whether the fault is in the pad or the cable, and replace only what failed, photographing the new connection before we leave.
Remote Control
Signs you need it
Remotes work only at close range, one remote stopped working while others still function, or the gate opens uncommanded from a stray frequency.
What it costs in Carrollton
Remote control service in Carrollton typically runs $90 to $240 per gate, which includes reprogramming and syncing existing remotes when the receiver is still sound.
How we do it
We identify the receiver model, check for frequency interference common near Carrollton’s I-35E corridor, reprogram or replace the receiver, and test every remote on site.
What Gate Access Control Costs in Carrollton
| Item | Typical range in Carrollton |
|---|---|
| Keypad entry repair or replacement | $150 - $400 |
| Remote control service | $90 - $240 |
| Access control system diagnostic | $75 - $180 |
Do I need HOA approval for access control changes in Carrollton?
Most Carrollton HOAs require architectural review for visible access control hardware changes, especially keypads and intercom panels mounted on gate pillars. We can provide the written scope and equipment list your HOA will ask for before you submit.
Can you service the access system already on my Carrollton gate?
Yes, we service whatever access hardware is already installed rather than pushing replacement. That includes older systems from the 1990s Carrollton buildout that other companies will not touch because parts are no longer current catalog. Call (817) 778-4585 and we will identify what you have.
Gate Parts & Welding in Carrollton

Gate parts and welding in Carrollton means dealing with failed hinges, leaning posts, split rails, and rusted-through frame sections on gates that have been standing since the 1980s. The same Vertisol clay that racks posts out of plumb also stress-fractures the hinge welds and roller brackets that hold the gate together. In Carrollton’s older subdivisions, many ornamental iron gates were welded on site during original construction, which means the repair has to match the existing steel rather than bolt on a generic kit. Our Gate Parts & Welding page covers the welding and fabrication side of the work in full.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, the hinge pin is visibly worn into an oval, or the gate makes a grinding sound when it swings.
What it costs in Carrollton
Hinge replacement in Carrollton runs $175 to $600 per pair depending on gate weight and whether the post side of the hinge needs welding or the post itself has moved.
How we do it
We lift the gate, replace both hinges as a set, realign the gate to the post, and weld or bolt the new hinge plates in place, photographing the finished weld.
Post Replacement
Signs you need it
The gate post leans visibly, the gate drags at the latch, or the post base shows cracks in the surrounding concrete from seasonal clay heave.
What it costs in Carrollton
Post replacement in Carrollton ranges $650 to $1,700 per post, with the higher end covering a deeper footing to resist the Vertisol movement.
How we do it
We dig out the old post, pour a footing deep enough to get below the active clay zone, set the new post in concrete, and rehang the gate to the new plumb line.
What Gate Parts & Welding Costs in Carrollton
| Item | Typical range in Carrollton |
|---|---|
| Hinge replacement | $175 - $600 per pair |
| Post replacement | $650 - $1,700 per post |
| Custom welding repair | $120 - $700 per section |
Can you weld a Carrollton gate back together without replacing the whole thing?
In most cases yes. We match the existing steel thickness and profile, grind back to clean metal, and weld the break rather than suggesting a full gate replacement. The repaired section gets photographed and documented before we leave.
How do I know if my Carrollton gate post needs replacement or just realignment?
If the post has moved in the footing, it can sometimes be re-plumbed and re-secured. If the concrete around the base is cracked or the post itself is rusted through at ground level, replacement is the honest fix. Call (817) 778-4585 for a written diagnosis with photos.
Brands We Service in Carrollton
We service nine automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule. In Carrollton, we keep legacy Elite and older LiftMaster parts on hand for the late-1980s Castle Hills and similar HOA installs, which cuts repair turnaround from weeks to days. See our brands for the full list.
Pricing for Gate Repair in Carrollton, TX

| Service | Typical range in Carrollton |
|---|---|
| Gate access control diagnostic | $75 - $180 |
| Keypad entry repair or replacement | $150 - $400 |
| Remote control service | $90 - $240 |
| Hinge replacement | $175 - $600 per pair |
| Post replacement | $650 - $1,700 per post |
| Custom welding repair | $120 - $700 per section |
What pushes repair cost up in Carrollton is soil movement: a post that has heaved out of plumb adds time and material to any hinge or operator job, and on gates built in the 1980s, the steel under the paint is often thinner than the homeowner expects. Every price is written and handed to you before work starts, and it does not change unless you approve a change in writing.
Neighborhoods We Serve in Carrollton
We work across Carrollton’s residential neighborhoods, from the HOA-managed subdivisions of Castle Hills to the older subdivisions between Josey Lane and the I-35E corridor. We dispatch locally, and a live person answers the phone 24/7. Typical response for a gate repair call in Carrollton is same day or next morning, depending on when you call and the urgency of the failure.
- Castle Hills
- Carrollton Heights
- Rosemeade
- Indian Creek
- Stonebridge
Service Area - Cities Near Carrollton

Vance Gate Repair serves Carrollton and the surrounding Dallas-Fort Worth cities. If your gate is in a neighboring community, we cover Coppell, TX, Plano, TX, Grapevine, TX, and Dallas, TX with the same written pricing and documented photo record on every visit.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Carrollton

A live person answers at (817) 778-4585 any hour. For a gate stuck open or a gate that will not close, we typically reach Carrollton homes same day or the next morning, depending on call time and how urgent the failure is. We tell you when we are coming and who is coming.
Many Carrollton HOAs require the repaired gate to match the original finish and style, especially in master-planned communities like Castle Hills. We can provide the written scope, photos, and part numbers your HOA will ask for before authorizing the work.
No. The written price is standard on every Carrollton job and on every job we do. Under Haven Standard Clause 1, the flat price is written and handed to you before any work begins, and it does not change unless you approve a change in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Carrollton Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.





Before
After
Before
After