Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Mighty Mule Gate Repair in Carrollton, TX | Vance Gate Repair Carrollton
We repair Mighty Mule gate openers across Carrollton, and we do it as an independent service provider – not a manufacturer affiliate or authorized dealer. What makes our Mighty Mule work different here is that we pair the opener repair with the actual ground it sits on. Call (817) 778-4585 for a written price before any tool comes off the truck.

Adrian Vance has been running gate calls in Carrollton for years, and the crew here knows the Mighty Mule model lines the way a mechanic knows a specific engine family. The FM350, FM500, MM362, MM371W – we see these every week in Castle Hills, Indian Creek, and the older subdivisions along Josey Lane. The opener is usually not the whole story. In Carrollton, the clay underneath the post is half the problem.
Why Carrollton Residents Choose Us for Mighty Mule Service
Most gate companies in the area will work on whatever motor is on the property. We actually know the Mighty Mule quirks that send homeowners and HOA board members to Google at 2 a.m. The early FM-series receiver lockouts where the remote stops talking to the board for no visible reason. The MM362 brake board failures that make the gate drift after it should have stopped. These are things you only recognize if you have fixed a few hundred of them.
We are Mighty Mule sales & service specialists in the practical sense: we keep the diagnostic patterns in our heads and the wear parts that fail most often within reach. We carry genuine Mighty Mule OEM arms, boards, and receivers when the cost makes sense against the opener’s remaining life. For pin-clips, brackets, and transformers, we use quality aftermarket parts that match or beat OEM durability. We will also tell you straight when a rusted post or fried board means replacing the whole opener is the honest move.
Adrian grew up in Queens and trained at Apex Technical School in Manhattan before spending nearly two decades on access-control and automated gate systems across DFW. Every job we leave gets a written record of what was found, what was set, and what was installed. Name what you found, name what it costs, name what you left behind.
Common Mighty Mule Gate Repair Problems We Solve in Carrollton

- Clay-heaved posts binding the swing arm: Vertisol clay shrinks in summer drought and swells after rain. When a hinge post racks out of plumb, the Mighty Mule swing arm binds mid-travel and the opener stalls – especially on older FM350s with worn gear reduction housings. We reset the post before we touch the opener, because fixing the arm without fixing the post means you will call us again in eight months.
- MM362 control board capacitor failure: The electrolytic capacitors on the MM362 board dry out after repeated DFW summers over 105°F. Symptoms are random self-opening, dead remotes, or a gate that ignores the remote entirely. We replace the board or reflow the affected joints depending on the condition.
- FM500 limit switch indexing loss: After a post strike or a high-wind event, the FM500 arm limit switches lose their trip point. The gate overruns the stop and the arm crushes against the bracket. We re-index the limits and verify full travel with a meter before we leave.
- Battery backup sulfation on slide gates: Factory-installed 12V battery backups on Mighty Mule slide gates sulfate within two Carrollton drought summers. They fail silently, then the first thunderstorm outage leaves the gate dead. We test the battery under load and replace it before the next storm cycle.
- Receiver lockouts on early FM-series units: The FM350 and early FM500 receivers occasionally lock out remotes after a power flicker or signal interference. The fix is a receiver reset and sometimes a firmware reflash. It is a ten-minute job once you know the sequence; it stumps a lot of first-timers.
Before
AfterMighty Mule Service in Carrollton: What Local Conditions Mean for Your Equipment
Carrollton’s Castle Hills and Indian Creek subdivisions were platted in the 1980s with wrought-iron pedestrian gates spaced only 8 feet from the street curb. That shallow setback changes the Mighty Mule arm geometry. On a standard install, the arm pulls the gate through its full arc. At 8 feet from the curb, the arm needs a non-standard 24-inch extension to clear the shorter run without over-torquing the hinge. Most installers do not stock that extension because Frisco and Allen homes were built with deeper setbacks. We stock it. We learned to stock it after watching a gate in Indian Creek bind itself into a pretzel because the previous installer tried to force a standard arm to do a short-throw job. If you need a new gate put in correctly from the start, our Carrollton Gate Installation team measures the actual setback before ordering parts.
This is the part of our Mighty Mule work in Carrollton that separates us from a generic gate company. We know the lot geometry here. We know that a gate on a Castle Hills corner lot sits 8 feet from the curb and swings over a sidewalk, so the arm has to be set up differently than the same model on a half-acre lot in Coppell. We also know that the clay under the post moves every season, so we set posts deeper than original and use more concrete than the builder did in 1987.
Mighty Mule Models & Products We Service in Carrollton

We work on the full Mighty Mule residential line that shows up in Carrollton driveways and pedestrian gates: the FM350 and FM500 swing arm openers, the MM362 and MM371W heavy-duty units, and the slide gate operators that show up on the older ranch-style properties along the east side of town near the I-35E corridor. Our approach to parts is simple. If the opener has real life left, we install genuine Mighty Mule OEM arms, boards, and receivers. If it is a wear item, we use aftermarket parts that are built to take the Texas heat and the clay movement. We stock common boards, receivers, pin-clips, brackets, and the 24-inch arms that Castle Hills and Indian Creek need. That local stock means most Mighty Mule repairs in Carrollton happen in one visit, not two.
Mighty Mule Service Pricing in Carrollton
Most Mighty Mule swing-gate motor replacements in Carrollton run between $450 and $900 depending on the model, the arm length, and whether the post has to be reset. For other gate issues beyond the opener, see our full Gate Repair in Carrollton services. A control board replacement on an MM362 typically lands between $180 and $320. Battery backup replacement runs $120 to $220 installed. Post and hinge repair, which about half of our Mighty Mule calls need first, runs $250 to $600 depending on how much concrete the original builder skipped. Every price we quote is written down and handed to you before any work starts. If another company gave you a written estimate, bring it in and we will review it at no cost. Call (817) 778-4585 for a free estimate.
Serving Carrollton, TX - Our Local Coverage Area

We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mighty Mule Gate Repair in Carrollton
Why does my Mighty Mule FM500 keep slamming shut after a dry Carrollton summer? The clay under your hinge post has shrunk during the drought, the post has racked out of plumb, and the FM500 limit switch lost its trip point. The gate now overruns the stop and slams into the pillar. The fix is a post reset plus a limit re-index. Call (817) 778-4585 and we will get it corrected.
Can you add a battery backup to my Mighty Mule MM362 without throwing away the whole opener? Yes. If the board and motor are sound, we add a battery backup in line with the existing power supply. It is a straightforward install and it keeps the gate working through the next thunderstorm outage. We test under load before we leave.
How do I know if my Mighty Mule FM350 is worth repairing or better to replace? If the gear reduction housing is worn and the arm has been binding for a season or two, the repair cost can approach the price of a new opener. We will tell you the number and let you decide. We do not get paid to steer you toward replacement.
The remote on my Mighty Mule gate works one day, then nothing the next. Could Carrollton’s power grid be causing it? It is more likely the FM-series receiver lockout than the grid. Power flickers and voltage dips can trip the receiver into a locked state. A receiver reset and re-pairing usually clears it. If it does not, the board is the next suspect.
I have a Mighty Mule swing gate on a driveway that slopes down toward the house. Why does the arm bind every spring after rain? Carrollton’s Vertisol clay swells when it absorbs spring rain, and that swelling pushes the post and the gate frame up and out of alignment. The arm then binds mid-travel. This is one of the most common seasonal patterns we see in the 1980s subdivisions. Call (817) 778-4585 for an on-site look and a written price.
Service Areas Near Carrollton

We serve Carrollton and the surrounding communities, including Carrollton service area coverage that extends into Coppell, Plano, Irving, and Grapevine. If you are in Mighty Mule service in Coppell or Mighty Mule service in Plano, the same crew and the same written-price standard apply. Most of these cities are a short drive from our Carrollton dispatch.
Book Your Mighty Mule Service in Carrollton Today
Call (817) 778-4585 for a free estimate. A live person answers the phone, and we can often get a technician out the same day for a failed opener. Written price before work starts, photo record when we leave.
Written by Adrian Vance, Owner at Vance Gate Repair Carrollton, serving Carrollton since 2014.





Before
After
Before
After