Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Carrollton Homeowners
A gate that drags, stalls halfway, or refuses to close is more than an inconvenience. It is a physical hole in your property line and a daily frustration. Vance Gate Repair Carrollton has repaired and installed more than 22,000 gates since 2014, and every single one received a written price before tools came off the truck. Our Carrollton technicians arrive in uniform, background-checked, and ready to hand you a name and photo before arrival. Call (817) 778-4585 for a free estimate, and a live person answers, 24 hours a day.
What Our Gate Repair Service Includes
Electric Gate Repair
Electric gate repair covers the motor, the control board, and the wiring that carries signal and power between them. You need it when the gate stops responding to remotes, buzzes without moving, or trips a breaker repeatedly. In Carrollton, our technicians carry diagnostic meters and wiring diagrams for nine major automation brands, so most Electric Gate Repair faults are traced and fixed on the first visit. We document every reading, every splice, and every replaced part in a photo log you keep.
Automatic Gate Repair
Automatic Gate Repair addresses the full mechanical sequence: the opener arm, the travel limits, the safety sensors, and the force settings that tell the gate when to stop. When a gate slams at the end of travel or reverses for no reason, those settings are almost always the cause. Vance Gate Repair Carrollton resets limit switches to the manufacturer’s exact travel range and photographs the new position before we leave. You get a written record of what changed, so the next technician doesn’t have to guess.
Hinge & Post Repair
A sagging gate is usually a hinge problem, and a leaning gate is usually a post problem. Carrollton’s clay soil shifts with moisture, and posts set without deep concrete footings slowly migrate out of alignment. We cut out failed welds, replace barrel hinges and j-bolts, and re-set posts in high-strength concrete with proper drainage as part of our Hinge & Post Repair service. The repair includes a written description of what was found and a photo of the finished mount.
Gate Realignment
Gate Realignment fixes the gate’s geometry: the gap at the latch, the clearance at the ground, the square of the frame. A gate that scrapes concrete or won’t latch has shifted, and forcing it only bends hardware faster. Our Carrollton team measures diagonal frame dimensions, shims and squares the leaf, and resets hinge pins so the gate hangs true. You see the before and after measurements in the job record.
Lock Repair
Lock repair covers mechanical locks, solenoid locks, maglocks, and the strike plates they engage. When a gate locks electrically but the mechanical latch won’t seat, the problem is usually alignment or a worn strike. We service and replace lock hardware on residential drive gates and light commercial entries across Carrollton. If the lock is tied to an access control system, we verify the release sequence before we call the job done.
Weld & Rust Repair
Texas gates live outdoors, and Carrollton’s summer humidity plus winter rain accelerates rust at every weld joint and water trap. We grind out rust, repair or replace compromised steel sections, and weld with appropriate filler for the gate’s material and thickness. Every weld is photographed before paint, and the repair record notes the exact location and extent of the repair. If the gate is beyond safe repair, we tell you in writing and show you why.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
Vance Gate Repair Carrollton works on whatever motor is already mounted on your property. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we stock OEM parts for most of them on the truck. If your swing gate runs a DoorKing arm, we know its limit-switch tolerances and the typical failure points on the 9150 series. If your slide gate runs a LiftMaster, we carry the exact drive sprocket and chain specs for the most common Carrollton installations.
We do not steer homeowners toward replacing a gate that can be repaired. A Mighty Mule that won’t respond is often a $200 control-board fix, not a $2,400 replacement. An Elite actuator that hums but doesn’t move is usually a capacitor, not a motor. Whether you have one of those brands or any other make, we can help. A live person answers (817) 778-4585 at any hour.
BeforeAfterSigns You Need Gate Repair Right Now
- The gate moves slower than it did last month. A gradual slowdown usually means the motor is working harder, the hinge is binding, or the capacitor is fading. Running it longer makes the repair more expensive.
- The gate stops halfway and reverses. That is almost always a misaligned photo-eye or an obstruction signal. Carrollton’s wind can shift a sensor bracket just enough to break the beam.
- The remote works only when you stand close. A range that shrinks means the receiver antenna is damaged, the battery is dying, or interference has increased. It is rarely the remote itself.
- The gate is scraping or dragging on one side. Metal on concrete wears both surfaces fast. The hinge is usually the first thing to go, and the frame follows.
- The gate makes a grinding or clicking sound. Gears, chains, and sprockets make specific noises when they fail. Clicking is often a relay or limit switch; grinding is usually mechanical wear.
Our Gate Repair Process - Step by Step
- 1
You call, and a person answers. No voicemail tree. The person who answers can schedule your visit and tell you what to expect. We dispatch from our Carrollton operations center every day of the week.
- 2
Your technician arrives with a name and a written scope. Before any work begins, you receive Clause 1: the written price. The technician walks the gate, identifies the fault, and writes a scope of work in plain language.
- 3
We diagnose with meters, not guesses. We read voltage at the board, resistance through the motor windings, and current draw under load. If the gate has a photo-eye, we verify alignment with the manufacturer’s specs, not by eye.
- 4
We repair and document everything. Every adjustment, every replaced part, every wire we land is photographed and noted. You receive the photo log and the part numbers before we leave, under Clause 4 of the Haven Standard.
- 5
We test the gate through full cycles. The gate runs open and close at least five times, with obstruction tests on the safety circuit. We confirm force settings and limit travel before we call the job complete. If it is not right, it is not done.
How Much Does Gate Repair Cost in Carrollton?
A typical gate repair in Carrollton runs between $180 and $650 depending on the fault. A misaligned photo-eye or a blown capacitor is usually on the low end. A failed swing-gate arm or a replacement control board lands in the middle. A full hinge replacement with post re-setting can reach the top of the range. Gate motor replacement typically falls between $700 and $1,500 installed, and the brand matters less than whether the arm bracket and mounting plate are intact.
What affects the price? The age of the gate, whether the failure is in the motor or the controls, and whether the post has shifted. What does not affect it: the time of day, the day of week, or the neighborhood. We do not charge evening or weekend premiums. Every estimate is free and written. You approve the number before we start, and the number does not change at the end. If another company has quoted you in writing, bring it. We will review it at no cost as a free second opinion.
Gate Repair Near Carrollton - Our Service Area
From our Carrollton location, we cover the surrounding metro: Gate Repair in Coppell, Irving, Grapevine, Flower Mound, and Little Elm are typically within 20 to 40 minutes of dispatch. Gate Repair in Plano, Frisco, Allen, and Euless are also served daily. If your neighborhood sits anywhere in the north Dallas corridor, call us. See our home page for the full service map and a closer look at Gate Repair in Carrollton.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Carrollton
Gate repair is the diagnosis and correction of any fault in the mechanical, electrical, or structural systems of a driveway or pedestrian gate. It covers motors, control boards, hinges, posts, locks, safety sensors, and welded steel. At Vance Gate Repair Carrollton, a repair always ends with a written price, a photo record, and a test sequence.
Most residential gate repairs in Carrollton are completed in one to three hours on site. Replacing a control board, resetting a limit switch, or aligning a photo-eye is usually under 90 minutes. If a part is not on the truck, we order it and return, and you are not charged for the return visit.
Most repairs fall between $180 and $650. Motor replacements run higher. The exact figure depends on what the technician finds, not on a guess made over the phone. Call (817) 778-4585 and we will quote the job after diagnosing it, in writing, before any work begins.
Yes. We service all three and six other major brands. Our Carrollton trucks carry OEM parts for LiftMaster, DoorKing, Elite, and Mighty Mule, so most repairs are completed same-day without waiting on a supplier. We treat the motor you already own, rather than steering you to a replacement.
Yes. A live person answers (817) 778-4585 at any hour. If your gate is stuck open or closed and you cannot secure your property, we respond at night and on weekends. There is no after-hours surcharge and no automated answering service.
Every repair is covered by the 365-Day Done Right Promise. If the repair is not right within one full year, Vance makes it right at no charge. No argument, no fee, no expiration date within that window. The written record from your visit is what makes the promise enforceable.
Clear the gate’s travel path and make sure the control box is accessible. If you have remotes, keypads, or access codes, have them nearby so we can test the full system. You do not need to move vehicles or disconnect anything. We handle the rest, and we leave the site cleaner than we found it.
Schedule Your Gate Repair Service in Carrollton Today
Call (817) 778-4585 and a live person will answer, day or night. You get a written price before any work starts, a documented photo record when we finish, and a full year of coverage under the 365-Day Done Right Promise. Estimates are free, and the price you approve is the price you pay. Your Carrollton gate is our job to make right.
Written by Adrian Vance, Owner at Vance Gate Repair Carrollton, serving Carrollton since 2014.