Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Irving, TX
Gate access control in Irving means working around HOA covenants in Las Colinas and aging 1980s-era operators across master-planned subdivisions. Most calls we take in Irving involve keypads and phone-entry systems tied to gates that were specified by community standards and are now hitting their second major service cycle. Blackland Prairie clay heaves posts out of plumb every drought-to-wet-season shift, which throws travel limits off and stresses control boards. Call (817) 778-4585 and a live person answers, any hour.
Why Irving Homes Are Different
Irving sits on expansive black-clay soil that swells and contracts with North Texas rainfall cycles. Gate posts in Irving tilt and shift seasonally, which means operators work against misaligned tracks and hinges. Summer heat above 105°F bakes capacitors and wiring insulation on south-facing installations. Las Colinas concentrates HOA-governed gated communities and corporate perimeter gates inside one master-planned area, so many Irving repairs require color-code submittals and property-management approval before any panel or housing gets replaced. Original-city neighborhoods near Heritage District carry 1950s and 60s ironwork, while Las Colinas communities run ornamental tubular steel on brick pillars, now aging into first or second major service cycles.
Our Main Irving Services
These are the three jobs Irving homeowners call us about most. Each has its own detailed Irving page.
Gate Repair in Irving
Irving gate repair often starts with a photo-eye out of alignment or a limit switch that drifted after the last soil shift. We document what we find, write the price, and hand it over before any tool comes out. Gate Repair in Irving
Gate Installation in Irving
New gate installations in Irving, especially inside Las Colinas HOAs, mean matching the CC&R hardware finish and submitting for pre-approval before fabrication. We handle the paperwork and the install. Gate Installation in Irving
Gate Motor & Opener in Irving
Irving summers accelerate capacitor failure in gate operators. We service nine automation brands and replace motors without steering you toward a whole new system unless the existing one is genuinely done. Gate Motor & Opener in Irving
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Irving
Gate access control in Irving means retrofitting keypads, card readers, and phone-entry systems onto gates that were installed when Las Colinas was still being built out. Many operators in these communities are now 15 to 25 years old, and the control boards are failing in heat that exceeds 105°F every summer. Since most of these gates sit inside HOA-governed communities, any visible hardware change usually needs a finish or color match to the community’s original spec. That’s a paperwork step we handle as part of the job. We stock control boards and keypads for DoorKing, LiftMaster, and Elite systems and can service whatever is already on the property. Gate Access Control
Keypad Entry
Signs you need it
Keypad buttons work intermittently, the code stops accepting, or the housing is cracked from sun exposure.
What it costs in Irving
Keypad replacement or new keypad entry in Irving typically runs $285 to $575 depending on the keypad brand and whether the control board needs rewiring.
How we do it
We test voltage at the keypad, swap the unit if needed, program codes, and photograph the new setup for your record.
Phone Entry
Signs you need it
The call ringtone stops, the gate won’t open from the phone, or the relay clicks but the operator doesn’t respond.
What it costs in Irving
Phone entry system repair or installation in Irving is typically $450 to $900 depending on whether it’s a cellular unit and how many entry codes you need.
How we do it
We test the phone line or cellular signal, check the relay, replace the system if needed, and program the entry codes on site.
What Gate Access Control Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Keypad entry replacement | $285 - $575 |
| Phone entry system | $450 - $900 |
| Card reader or video intercom add-on | $600 - $1,400 |
Can you match my HOA’s hardware finish?
Yes. We submit the RAL color code or hardware finish listed in your CC&Rs before installing. If your HOA requires pre-approval, we include the submittal in the written scope before work starts.
Do you work with existing gate motors or only new systems?
We service nine automation brands and repair what’s on the property. Replacing a control board or keypad is usually less expensive than a full system swap, and we quote that first. Call (817) 778-4585 for an exact written price.
Gate Parts & Welding in Irving
Gate parts and welding in Irving come down to two recurring problems: hinges and posts that have been pulled out of line by Blackland Prairie clay, and ornamental steel that’s rusting at the weld points after decades of North Texas heat and rain. Las Colinas communities specified tubular steel and wrought iron that is now 20 to 30 years old, so we replace worn hinges, weld cracked rails, and set new posts in concrete that won’t heave as dramatically. Gate Parts & Welding
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground, or the hinge pin has visible play.
What it costs in Irving
Hinge replacement in Irving runs $180 to $450 per hinge depending on gate weight and whether the post needs shimming.
How we do it
We cut the old hinge, weld or bolt the new one, and align the gate to travel true.
Post Replacement
Signs you need it
The post leans visible to the eye, or the gate binds because the post has shifted out of plumb.
What it costs in Irving
Post replacement in Irving runs $475 to $1,100 including concrete set and post material.
How we do it
We dig out the old post, set a new one in concrete, and remount the gate with the operator limits reset.
Custom Welding
Signs you need it
A crack runs through a horizontal rail, or a picket has separated from the frame.
What it costs in Irving
Custom welding on ornamental gates in Irving runs $150 to $500 per repair point depending on access and rust damage.
How we do it
We grind the crack clean, weld it, and apply a rust-inhibiting primer matched to your gate’s finish.
What Gate Parts & Welding Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Hinge replacement (per hinge) | $180 - $450 |
| Post replacement | $475 - $1,100 |
| Custom welding per repair point | $150 - $500 |
Can you weld my gate while it’s still hanging?
Yes, in most cases. We weld horizontal rails and pickets in place when the hinges are sound. If the post is compromised, we recommend setting a new post first. Call (817) 778-4585 for an exact written quote.
How long does post replacement take in Irving’s soil?
Usually one day to dig, set, and pour. We let the concrete cure to a working strength before remounting the gate, so plan on the gate being offline for a full day.
Brands We Service in Irving
We carry service parts for DoorKing, LiftMaster, Elite, and Mighty Mule in our Irving dispatch vehicles. Most stocked parts mean same-week turnaround for control boards and keypads. See our brands for the full list.
Pricing for Gate Repair in Irving, TX
| Service | Typical range in Irving |
|---|---|
| Keypad entry replacement | $285 - $575 |
| Phone entry system | $450 - $900 |
| Card reader or video intercom add-on | $600 - $1,400 |
| Hinge replacement (per hinge) | $180 - $450 |
| Post replacement | $475 - $1,100 |
| Custom welding per repair point | $150 - $500 |
| Gate roller replacement | $120 - $350 |
| Rail repair | $200 - $600 |
Prices in Irving push upward when HOA color-matching submittals add lead time or when clay heave means the post work is more involved than a simple swap. Whatever the job, the written price is in your hand before any work starts.
Neighborhoods We Serve in Irving
We dispatch to every part of Irving, from the Heritage District’s original 1950s neighborhoods to the master-planned sections of Las Colinas. Our crews know which communities require HOA pre-approval and which have the oldest gate hardware.
- Las Colinas
- Valley Ranch
- Heritage District
- University Hills
- Northgate Heights
Service Area - Cities Near Irving
We also serve Dallas, TX just south and east, Carrollton, TX to the north, Coppell, TX to the northwest, and Euless, TX to the west. Dispatch is coordinated from our Dallas-Fort Worth office, and Irving crews run local every day.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Irving
Most Irving calls get a same-day response from our local dispatch. A live person answers the phone 24/7, and we schedule the first available technician for your area. Emergency gate failures that leave a driveway blocked get priority routing.
In many Las Colinas communities, yes, if the repair changes visible hardware or the operator housing. We check the CC&R requirements, match the RAL color or hardware finish, and submit the approval paperwork as part of the written scope before work begins.
Yes. Every job gets a written scope and a written flat price handed to you before any tool comes out. That’s Haven Standard Clause 1, and it applies to every gate repair in Irving, from a keypad swap to a full post replacement.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.