Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Keller
Gate installation in Keller, TX means two very different jobs depending on which side of town you’re on. On the west side you’ve got ranch pipe and tube gates spanning 16 to 20 feet across equestrian driveways. Ten minutes east you’re looking at ornamental iron driveway gates that have to match an HOA’s architectural profile. A typical new driveway gate installation in Keller runs $2,800 to $9,500 installed, with the operator included, and most jobs are completed in one to two days. Call (817) 778-4585 and we’ll give you a written price before anyone picks up a tool.
Why Vance Gate Repair Carrollton Is Keller’s Preferred Gate Installation Company
We work in Keller every week. That’s not a marketing line, it’s logistics. Our crews know that a gate post set in the black clay along Shady Grove Road behaves nothing like a post set in the sandy loam near Big Bear Creek, and we spec footings accordingly. Keller homeowners call us because the price is on paper before the work starts, and because every visit leaves a photo record of what we found, what we set, and what we installed. That’s the Haven Standard, and it applies to every gate job we do in Keller.
Adrian Vance started this company in 2014 after years of commercial access-control work, and that background shows up in the documentation. You get a wiring diagram when we install an operator, a photo log of the finished gate, and a written record of every part number. No future technician has to guess what’s behind the panel.
Our Gate Installation Services in Keller
Driveway Gate Installation
Driveway gates in Keller span everything from 12-foot ornamental aluminum at a Woodland Springs entrance to 20-foot pipe-and-rail ranch gates on acreage lots. We measure the opening, check the slope, and recommend the gate and operator as a matched pair. A single swing driveway gate with operator typically runs $3,200 to $6,800 in Keller depending on width, material, and whether we need to trench power or go solar.
Pedestrian Gate Installation
Pedestrian gates get overlooked until someone has to walk around a 600-pound driveway gate every day. We install matching pedestrian gates alongside new driveway gates or as standalone entries, usually in the $900 to $2,400 range in Keller. Hardware matters here: we use adjustable hinges and Mag-Locks or solenoid latches that won’t bind when the ground moves, which it does every spring and fall in Keller’s clay.
Sliding Gate Installation
Sliding gates make sense on Keller properties with steep driveway approaches or limited swing room. A cantilever sliding gate skips the ground track entirely, which matters when your driveway crosses a drainage swale. Expect $3,800 to $9,500 for a sliding gate with operator in Keller, with the higher end covering heavy 20-foot steel gates on V-track or cantilever systems. We match the concrete pad to the operator you actually have, not the other way around.
Swing Gate Installation
Swing gates remain the most common style in Keller, and they demand the most attention to post footings. A double swing gate on a 16-foot opening needs hinge posts set deep enough to resist black-clay heave, or you’ll be re-aligning it twice a year. New swing gate installations in Keller run $2,800 to $7,200 including operator, with double gates and custom ornamental profiles at the upper end.
Double Gate Installation
Double gates are standard on Keller’s larger lots, especially in the horse-country tracts west of town. The two leaves have to meet cleanly, and that means both posts have to stay put. We pour concrete footings at least 36 inches deep for double gates in Keller, which is below the active shrink-swell zone. A 400-pound double pipe gate across a 16-foot opening can’t hang on posts set like fence line posts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Keller
We install and service operators from Ghost Controls, DoorKing, Elite, and Mighty Mule, among others. Keller is full of older Elite and Viking slide units from the 1990s, and a fair number of newer Ghost Controls and Mighty Mule solar setups on acreage gates. We don’t steer you toward a replacement operator just because it’s easier for us. If the motor can be repaired, we repair it and document the work. We stock common parts for these brands on the truck so most Keller calls are single-visit.
Common Gate Installation Problems We See in Keller Homes
- Black-clay heave tilting gate posts. Keller sits on Tarrant County’s expansive clay belt. When it dries, the ground shrinks and pulls away from concrete. When it rains, it swells and pushes the post sideways. A 16-foot ranch gate on Shady Grove can shift enough that the safety photocell beam misses by half an inch, and the operator simply won’t run.
- Undersized solar packages on shaded driveways. Solar gate openers work well in full sun, but many Keller acreage driveways run through tree canopy near Big Bear Creek. A panel that pulls 3 amps in open sun might pull 0.8 amps in dappled shade, leaving the battery under 40% by morning. We size solar packages based on the actual site, not the brochure.
- Double gates sagging at the hinge post after two decades. Woodland Springs homes built in the early 2000s are hitting the 20-year mark. The gate leaves sag and stop meeting at the latch. A panel-only repair fails again within months. The footing under the hinge post needs correction before the gate can hang true.
- 1990s operators with obsolete mounting footprints. Homes in Keller’s older town core often have original Viking or Elite slide operators. Parts are gone. But the concrete pad and conduit run from that 1990s install rarely match modern operator specs. What looks like a motor swap becomes a half-day concrete and electrical job, and we price that honestly up front.
Pricing for Gate Installation in Keller, TX
Here are the numbers, in writing.
| Job | Keller Price Range |
|---|---|
| Single swing gate, steel or aluminum, with operator | $2,800 - $6,800 |
| Double swing gate with operator | $4,200 - $7,200 |
| Sliding gate with operator | $3,800 - $9,500 |
| Pedestrian gate only | $900 - $2,400 |
| Solar package (panel, battery, charge controller) | $600 - $1,400 installed |
| Operator install on existing gate | $1,100 - $2,200 |
What moves the price in Keller: gate width and weight, whether we need to pour new footings, whether power needs to be trenched from the house or a solar package makes more sense, and whether an HOA requires a specific ornamental profile. Everything is quoted and agreed before any work starts. That’s Haven Standard Clause 1: have it in writing. Estimates are free. Call (817) 778-4585.
We Also Serve Cities Near Keller
Vance Gate Repair Carrollton serves Keller and the surrounding communities, including Southlake, Colleyville, Bedford, and Flower Mound. If you’re just west or south of the Keller line, you’re still in our regular service area. If you need Gate Installation anywhere in the northeast Tarrant County corridor, we’ll get a crew to you.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Keller
It can, but the panel and battery have to be sized for the actual shade you have, not the shade a brochure assumes. On Keller acreage properties with tree canopy near Big Bear Creek or along Bear Creek tributaries, we often spec a 30-watt panel minimum and a larger deep-cycle battery to carry the gate through three or four cloudy days. The alternative is trenching power, which works anywhere but costs more up front. We’ll show you both numbers and you choose.
Because Keller’s black clay swells when it gets wet, and if your gate post was set shallow, the concrete footing moved and threw the gate out of alignment. We see this constantly on gates installed by fencing companies that treated the footing like a fence post. Gate posts under operator load need to go below the active clay zone, which in Keller means at least 36 inches. We dig the hole, we know why.
Usually, yes. The gate itself has to weigh within the operator’s rating, and the hinge post has to be sound. We check the post with a level and a straightedge before recommending anything. If the post has heaved or the hinges are worn through, the operator will fight the gate until something breaks. We’ve done dozens of operator installs on existing ranch pipe gates in Keller’s western tracts, and we photograph the post condition before and after.
Woodland Springs and most Keller HOA communities we work in have architectural review standards that govern gate material, color, and profile. That means a replacement gate often has to match the surrounding ornamental iron or aluminum, not just function. We keep photos and profiles from prior jobs in these communities, and we can draft the submittal language the HOA expects. Budget an extra week for review if your community requires one.
Most quality operators in Keller last 10 to 15 years, but the control board and limit-switch components degrade faster in heat. Keller summers with weeks above 100°F cook the plastic and electrolytic capacitors inside the control housing, especially on southern exposures with no shade. We mount control boxes with heat in mind, and we use surge protection because Keller sits in lightning-prone storm territory. A properly ventilated install lasts years longer than a box bolted in direct afternoon sun.
Contact Vance Gate Repair Carrollton
If you’re in Keller and need a gate installed, a solar package sized for your driveway, or an operator mounted on an existing ranch gate, call (817) 778-4585. A live person answers, 24 hours a day. We’ll come out, measure, photograph, and hand you a written price. No obligation, no pressure, no surprise invoice at the end.
Written by Adrian Vance, Owner at Vance Gate Repair Carrollton, serving Keller since 2014.
Gate Installation in Nearby Areas