Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Keller, TX
Gate access control is the most common call we handle in Keller, and it usually traces back to two local realities: homes built between 1990 and 2015 whose original keypads and receivers are now failing in the Texas heat, and black-clay soil movement that pulls gate frames out of square and defeats the entry sensors. When a keypad stops accepting codes or a remote quits mid-driveway, the fix here often means diagnosing both the electronics and the structure behind them. We carry parts for Ghost Controls, DoorKing, Elite, and Mighty Mule systems on the trucks, so most calls don’t wait on a second trip. Call (817) 778-4585 and a live person answers, day or night.
Why Keller Homes Are Different
Keller sits on the same Vertisol black-clay belt that runs under all of Tarrant County. That clay expands and contracts through every wet-dry cycle, and the result is gate posts that heave, tilt, and throw operators out of travel. A gate that worked in March will bind in August, not because the motor failed, but because the post moved a quarter inch. Homes in Woodland Springs and Keller Crossing carry the additional weight of HOA design standards: replacement hinges, pickets, and operators must match the existing ornamental profile, which adds cost and lead time to what looks like a simple parts swap.
The boom-era housing stock matters too. Many Keller homes went in with automated driveway gates between 1995 and 2010, and those original operator boards are now at end of life. Summer heat above 100°F accelerates capacitor and limit-switch failures, while the DFW ice storms that arrive every few winters can snap decorative pickets and overload operator torque overnight. A technician working Keller’s western tracts along Shady Grove and Ottinger Road may repair a welded pipe ranch gate at an equestrian lot in the morning and a powder-coated ornamental aluminum gate in a master-planned subdivision that afternoon. The hardware, the operators, and the structural demands are completely different, and a company that only handles one type will misdiagnose the other.
Our Main Keller Services
The three services below have their own Keller pages with full pricing, sub-job breakdowns, and local detail. Follow the link for the one that matches your situation.
Gate Repair in Keller
Broken hinge, sagging leaf, latch that no longer catches, or a gate that scrapes the drive. In Keller, most mechanical repairs also involve checking what the black clay did to the post alignment before we touch the hardware. We photograph everything we find, write the price, and do the work only after you approve it. Full detail is on the Gate Repair in Keller page.
Gate Installation in Keller
New gates in Keller must satisfy HOA design standards in communities like Woodland Springs, and the soil means post footings need to be deeper and wider than a generic install. We measure, quote in writing, order to match existing ornamental profiles, and document the entire install. The Gate Installation in Keller page covers what a full job includes and what it costs.
Gate Motor & Opener in Keller
Keller’s 15-to-30-year-old homes are reaching the point where original slide and swing operators fail, and many of the mid-90s Viking and Elite units are obsolete enough that a motor swap also means concrete work and conduit changes. We service nine operator brands and stock boards, arms, and receivers locally. The Gate Motor & Opener in Keller page has brand-specific pricing and failure signs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Keller
Gate access control in Keller means keypads, remotes, phone entry, card readers, and video intercoms that have to survive Texas heat and clay-soil ground shift. The most common pattern we see is a keypad or receiver mounted on a moving gate leaf, where the constant vibration from misaligned travel works connections loose and the summer sun bakes the circuit board. This is our most-requested service here, and it’s why we keep boards, keypads, and receivers for Ghost Controls, DoorKing, Elite, and Mighty Mule in local stock. Our Gate Access Control work always leaves you with a written record of what was installed and photographed evidence of every setting.
Keypad Entry
Signs you need it
The keypad accepts some codes but not others, the backlight is dead, or the housing has cracked from sun exposure and water gets inside after every storm.
What it costs in Keller
A new keypad in Keller runs $230-$540 installed, depending on whether we’re replacing a surface-mount unit or a flush-mount model that requires cutting and waterproofing the post.
How we do it
We test the existing keypad for voltage and signal, confirm whether the problem is the pad or the receiver board, then install the replacement with sealed connectors and photograph the final wiring.
Remote Control
Signs you need it
Remotes that worked from the street now need to be held against the gate, work intermittently, or fail only in hot weather point to a receiver or antenna problem, not a dead battery.
What it costs in Keller
Receiver replacement or repair runs $150-$260, and a full set of new remotes adds $50-$90 per remote depending on brand and frequency.
How we do it
We test signal strength at the antenna, check for interference from nearby transmitters, then replace or reprogram the receiver and verify range from a realistic driveway distance.
Phone Entry
Signs you need it
The gate won’t call your cell phone anymore, calls drop mid-ring, or the system dials but no audio passes through.
What it costs in Keller
Phone entry system repair starts at $180, while a full replacement with a new cellular unit runs $450-$900 installed.
How we do it
We check the cellular signal at the gate location, test the relay and speaker, then replace the failed component or swap in a new unit and program your numbers on site.
What Gate Access Control Costs in Keller
| Item | Typical range in Keller |
|---|---|
| Keypad replacement | $230-$540 |
| Receiver repair or replacement | $150-$260 |
| Phone entry system replacement | $450-$900 |
All prices are written down and handed to you before we start work. The black clay soil can add cost if post movement has pulled wiring loose and we need to re-run conduit from the house to the gate.
Does Keller’s soil actually affect access control systems?
Yes. When gate posts move even a quarter inch in the black clay, the gate leaf sits out of square, and keypads or card readers mounted on the gate take vibration and flex they weren’t designed for. We see wire breaks and loose terminal connections on gate-mounted devices far more often in Keller than in areas with stable soil.
Can a gate access control failure open the gate when it shouldn’t?
A failed relay or a shorted wire can hold a gate open or trigger it to swing without a command. If your gate is opening on its own, treat it as a safety issue and stop using the operator until it’s diagnosed. Call (817) 778-4585 and a live person will help you triage it.
Gate Parts & Welding in Keller
Gate parts and welding in Keller is driven by two things: 15-to-30-year-old ornamental gates reaching the end of their hinge and weld-joint life, and black-clay soil movement that breaks welds and shears bolts when posts shift independently of each other. The older custom gates in Keller’s original town core and the equestrian properties west along Ottinger Road need structural repair far more than they need new operators. Every Gate Parts & Welding visit includes a photographed record of what we found, what we cut out, and what we welded back in.
Hinge Replacement
Signs you need it
The gate sags visibly, scrapes the driveway on the latch side, or the hinge pins show flat spots and the leaf won’t swing level.
What it costs in Keller
Hinge replacement on a Keller driveway gate runs $180-$340 for a pair, including cutting off the old weld-on hinges and grinding the post clean.
How we do it
We support the gate leaf, cut the old hinges, grind the post clean, weld new hinges in position, and photograph the finished welds and swing clearance.
Post Replacement
Signs you need it
A leaning post, a gate that won’t latch because the post moved, or a post that’s cracked at the base from years of clay-soil heave.
What it costs in Keller
Post replacement in Keller runs $350-$750 per post, including concrete removal, new footing, and re-setting the post plumb.
How we do it
We saw the old post at the base, break out the existing concrete, dig a deeper footing with gravel drainage for the clay soil, set the new post, and re-hang the gate.
What Gate Parts & Welding Costs in Keller
| Item | Typical range in Keller |
|---|---|
| Hinge replacement | $180-$340 |
| Post replacement | $350-$750 |
| Weld repair, per joint | $90-$180 |
Welding on ornamental gates in HOA communities like Woodland Springs may need paint or powder-coat matching after the repair, which adds touch-up cost. Your written price includes that line item before we start.
Can you weld ornamental gates without ruining the finish?
We grind back the powder coat around the joint, weld, then apply a color-matched touch-up. On high-visibility gates we quote a professional respray of the welded section. Expect some finish work after a structural weld.
How long does post replacement take in Keller’s clay soil?
Usually half a day. The old concrete comes out, we dig a deeper footing with gravel at the base, and we use a higher-strength mix so the post holds through the next shrink-swell cycle. Call (817) 778-4585 for a written price.
Brands We Service in Keller
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule systems, along with the rest of the major automation brands. Common boards, receivers, and arms are stocked locally for same-week turnaround. See our brands for the full list of what we service.
Pricing for Gate Repair in Keller, TX
| Service | Typical range in Keller |
|---|---|
| Hinge replacement | $180-$340 |
| Post replacement | $350-$750 |
| Weld repair, per joint | $90-$180 |
| Keypad replacement | $230-$540 |
| Receiver repair or replacement | $150-$260 |
| Phone entry system replacement | $450-$900 |
Keller’s clay soil and HOA matching requirements are the two factors that most often push a job above the base range: deeper footings and ornamental-profile matching parts both cost more. You’ll see the full price in writing before any work begins.
Neighborhoods We Serve in Keller
We work across Keller, from the original town core to the western acreage. Typical response time anywhere in the city is under two hours for emergency calls.
- Woodland Springs
- Keller Crossing
- Hidden Lakes
- Shady Grove area
- Ottinger Road corridor
Service Area - Cities Near Keller
We serve Keller and the surrounding communities across the Dallas-Fort Worth metro. If you’re in Southlake, TX, Colleyville, TX, Bedford, TX, or Flower Mound, TX, we can schedule the same written-price service.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Keller
We dispatch locally and a technician typically reaches any Keller address in under two hours. A stuck-open gate is a security issue, and we treat it that way. Call (817) 778-4585 and a live person answers, no voicemail loop, any hour.
Many do, especially in communities like Woodland Springs and Keller Crossing where ornamental profiles are governed by design standards. If your HOA requires approval, we can provide the written scope, material specs, and photos you need to submit. You own the approval process; we document everything.
Yes. When the original manufacturer is gone or a profile is discontinued, we fabricate matching pickets, hinges, or sections and finish them to blend with the existing gate. We’ll tell you before we start whether a repair can match invisibly or whether a full section replacement will look cleaner.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Keller Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.